topic Re: FcOE IBM N 6040 (FAS3140) in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/FcOE-IBM-N-6040-FAS3140/m-p/21168#M1474 <HTML><HEAD></HEAD><BODY><P>One other thing, I has read somewhere that you need to use the Nexus 1000v on your ESX servers to support FCoE over CNAs - Is this correct? </P></BODY></HTML> Wed, 25 Aug 2010 11:46:18 GMT nsitps1976 2010-08-25T11:46:18Z FcOE IBM N 6040 (FAS3140) https://community.netapp.com/t5/ONTAP-Hardware/FcOE-IBM-N-6040-FAS3140/m-p/21163#M1472 <HTML><HEAD></HEAD><BODY><P>Has anyone any experience of using native FCoE with this system - We are exploring a green field solution using end-to-end FCoE, see below:</P><P></P><P>IBM x3850 X5</P><P>Qlogic CNAs</P><P>VMware vSphere</P><P>Cisco Nexus 5010</P><P>IBM N 6040</P><P></P><P>Has anyone done this, tested this? - What was your experience, should we consider it or should we look at FC at the array with FCoE from the switch to the ESX servers? </P></BODY></HTML> Thu, 05 Jun 2025 07:09:55 GMT https://community.netapp.com/t5/ONTAP-Hardware/FcOE-IBM-N-6040-FAS3140/m-p/21163#M1472 nsitps1976 2025-06-05T07:09:55Z Re: FcOE IBM N 6040 (FAS3140) https://community.netapp.com/t5/ONTAP-Hardware/FcOE-IBM-N-6040-FAS3140/m-p/21168#M1474 <HTML><HEAD></HEAD><BODY><P>One other thing, I has read somewhere that you need to use the Nexus 1000v on your ESX servers to support FCoE over CNAs - Is this correct? </P></BODY></HTML> Wed, 25 Aug 2010 11:46:18 GMT https://community.netapp.com/t5/ONTAP-Hardware/FcOE-IBM-N-6040-FAS3140/m-p/21168#M1474 nsitps1976 2010-08-25T11:46:18Z