topic filer don't start up or boot in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/filer-don-t-start-up-or-boot/m-p/23002#M1597 <HTML><HEAD></HEAD><BODY><P>I have two filer they are FAS3020 and the other day we had a power outage and they went down hard.&nbsp; when we can in the next day to bring them back online, one came up fine and the other on would power on, run threw the memory check and them give a error message "loading: drive status: 51 error 40".&nbsp; I tried to enter some commands from that point and the only thing i get is "command status -1 or -6.&nbsp; Have anyone every seen this before and if so how can i get it going?</P></BODY></HTML> Thu, 05 Jun 2025 06:43:49 GMT craigyok2 2025-06-05T06:43:49Z filer don't start up or boot https://community.netapp.com/t5/ONTAP-Hardware/filer-don-t-start-up-or-boot/m-p/23002#M1597 <HTML><HEAD></HEAD><BODY><P>I have two filer they are FAS3020 and the other day we had a power outage and they went down hard.&nbsp; when we can in the next day to bring them back online, one came up fine and the other on would power on, run threw the memory check and them give a error message "loading: drive status: 51 error 40".&nbsp; I tried to enter some commands from that point and the only thing i get is "command status -1 or -6.&nbsp; Have anyone every seen this before and if so how can i get it going?</P></BODY></HTML> Thu, 05 Jun 2025 06:43:49 GMT https://community.netapp.com/t5/ONTAP-Hardware/filer-don-t-start-up-or-boot/m-p/23002#M1597 craigyok2 2025-06-05T06:43:49Z filer don't start up or boot https://community.netapp.com/t5/ONTAP-Hardware/filer-don-t-start-up-or-boot/m-p/23008#M1598 <HTML><HEAD></HEAD><BODY><P>This looks to be an issue with the CF card. You could try reseating the CF card or swapping the CF card from the other head (if they share the same Ontap versions)</P></BODY></HTML> Fri, 14 Oct 2011 19:36:14 GMT https://community.netapp.com/t5/ONTAP-Hardware/filer-don-t-start-up-or-boot/m-p/23008#M1598 dougsiggins 2011-10-14T19:36:14Z filer don't start up or boot https://community.netapp.com/t5/ONTAP-Hardware/filer-don-t-start-up-or-boot/m-p/23012#M1599 <HTML><HEAD></HEAD><BODY><P>Yet another possibility is netboot.</P></BODY></HTML> Sat, 15 Oct 2011 15:06:18 GMT https://community.netapp.com/t5/ONTAP-Hardware/filer-don-t-start-up-or-boot/m-p/23012#M1599 aborzenkov 2011-10-15T15:06:18Z Re: filer don't start up or boot https://community.netapp.com/t5/ONTAP-Hardware/filer-don-t-start-up-or-boot/m-p/23016#M1600 <HTML><HEAD></HEAD><BODY><P>currently have same issue on a FAS3050.. and netboot not working. </P><P><SPAN style="font-size: 10pt; line-height: 1.5em;">stuck on its 1st output..&nbsp; </SPAN></P><P></P><P><SPAN style="font-size: 10pt; line-height: 1.5em;">Loading: 0x200000/44423284</SPAN></P><P></P><P><SPAN style="font-size: 10pt; line-height: 1.5em;">any ideas guys?<BR /></SPAN></P></BODY></HTML> Sat, 13 Apr 2013 06:31:57 GMT https://community.netapp.com/t5/ONTAP-Hardware/filer-don-t-start-up-or-boot/m-p/23016#M1600 SOFTWARE70 2013-04-13T06:31:57Z Re: filer don't start up or boot https://community.netapp.com/t5/ONTAP-Hardware/filer-don-t-start-up-or-boot/m-p/23021#M1602 <HTML><HEAD></HEAD><BODY><P>If netboot and/or boot_diags fails possibly the mainboard, cpu, ram or nvram card has died. You either still have a valid netapp support contract or you need to get new/refurbished parts from a 3rd party broker.</P></BODY></HTML> Sun, 14 Apr 2013 21:51:50 GMT https://community.netapp.com/t5/ONTAP-Hardware/filer-don-t-start-up-or-boot/m-p/23021#M1602 thomas_glodde 2013-04-14T21:51:50Z