topic Re: SAS hba port to imo circles in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/SAS-hba-port-to-imo-circles/m-p/24381#M1712 <HTML><HEAD></HEAD><BODY><P>Sorry for the delay aborzenkov, slight error on the customer's part.&nbsp; Thanks.</P></BODY></HTML> Fri, 28 Dec 2012 02:31:00 GMT BOB_KOCHANSKI 2012-12-28T02:31:00Z SAS hba port to imo circles https://community.netapp.com/t5/ONTAP-Hardware/SAS-hba-port-to-imo-circles/m-p/24370#M1710 <HTML><HEAD></HEAD><BODY><P>FAS3240AE system with single stack of disk shelves existing.</P><P></P><P>Changes made were relocate system in a different rack, installed 4 - 2port 8Gb FC cards and 2 - 4port SAS cards, split the 8 disk shelves into 2 stacks across controllers for better load balancing.</P><P></P><P>Brought system up with no errors reporting.</P><P></P><P>Customer sent e-mail stating they were getting these alerts about the "sas hba port to imo circles"&nbsp; Can't find any information on this, has anyone seen this issue before?&nbsp; If so can you chime in with some information on it?</P><P></P><P>Thanks,</P></BODY></HTML> Thu, 05 Jun 2025 06:13:44 GMT https://community.netapp.com/t5/ONTAP-Hardware/SAS-hba-port-to-imo-circles/m-p/24370#M1710 BOB_KOCHANSKI 2025-06-05T06:13:44Z Re: SAS hba port to imo circles https://community.netapp.com/t5/ONTAP-Hardware/SAS-hba-port-to-imo-circles/m-p/24375#M1711 <HTML><HEAD></HEAD><BODY><P>Pasting exact message would help.</P></BODY></HTML> Mon, 17 Dec 2012 13:43:13 GMT https://community.netapp.com/t5/ONTAP-Hardware/SAS-hba-port-to-imo-circles/m-p/24375#M1711 aborzenkov 2012-12-17T13:43:13Z Re: SAS hba port to imo circles https://community.netapp.com/t5/ONTAP-Hardware/SAS-hba-port-to-imo-circles/m-p/24381#M1712 <HTML><HEAD></HEAD><BODY><P>Sorry for the delay aborzenkov, slight error on the customer's part.&nbsp; Thanks.</P></BODY></HTML> Fri, 28 Dec 2012 02:31:00 GMT https://community.netapp.com/t5/ONTAP-Hardware/SAS-hba-port-to-imo-circles/m-p/24381#M1712 BOB_KOCHANSKI 2012-12-28T02:31:00Z