topic Re: Upgrade to 7.3.6 or 7.3.6P1? in ONTAP Hardware

Upgrade to 7.3.6 or 7.3.6P1?

doug_dockter — Thu, 05 Jun 2025 06:43:49 GMT

My FAS2020 is currently on release 7.3.5.1 of Data ONTAP. Because of the well known bug in this version I'm planning to upgrade to 7.3.6. Should I go to 7.3.6 or 7.3.6P1?

Upgrade to 7.3.6 or 7.3.6P1?

scottgelb — Fri, 14 Oct 2011 16:27:59 GMT

P2 is out now... I would go with P2

Upgrade to 7.3.6 or 7.3.6P1?

mohammedimrankhan — Fri, 14 Oct 2011 22:09:35 GMT

Hi How do i access the P1 or P2 i have looked on the download page but it only has 7.3.6?

Thanks

Upgrade to 7.3.6 or 7.3.6P1?

scottgelb — Fri, 14 Oct 2011 22:10:49 GMT

bottom of download page...select specific software.. Here is a link to 7.3.6P2 http://now.netapp.com/NOW/download/software/ontap/7.3.6P2/

Upgrade to 7.3.6 or 7.3.6P1?

mohammedimrankhan — Fri, 14 Oct 2011 22:25:43 GMT

Thank you very much, that was very quick

For some reason I could not access this from the down load page.

Imran

Upgrade to 7.3.6 or 7.3.6P1?

mohammedimrankhan — Fri, 14 Oct 2011 22:31:48 GMT

One more thing

My browser is not showing the information in order

There are many different versions (M, I, Q)

What is the difference between these versions?

Re: Upgrade to 7.3.6 or 7.3.6P1?

scottgelb — Fri, 14 Oct 2011 22:34:32 GMT

2020 is the "e" code. Elf for 32bit. Make sure you download the correct one. M is for mips, q for 64bit, i for legacy intel.. Make sure you use "e" version for the fas2020.

Typos Sent on Blackberry Wireless

Upgrade to 7.3.6 or 7.3.6P1?

mohammedimrankhan — Fri, 14 Oct 2011 22:37:27 GMT

I am using fas3020c,

Thanks for your help

Re: Upgrade to 7.3.6 or 7.3.6P1?

scottgelb — Fri, 14 Oct 2011 22:39:49 GMT

still e code

Upgrade to 7.3.6 or 7.3.6P1?

mohammedimrankhan — Fri, 14 Oct 2011 22:45:58 GMT

Thanks