topic Re: How to identify empty expansion slots in netapp in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/How-to-identify-empty-expansion-slots-in-netapp/m-p/34311#M2340 <HTML><HEAD></HEAD><BODY><P>Try the following:</P><P>1.&nbsp; fcadmin device_map</P><P>2. sasadmin shelf &lt;adapter&gt;</P><P></P><P>The missing numbers (representing disks) should tell you what slots are empty.</P></BODY></HTML> Mon, 06 Jan 2014 20:06:48 GMT nitish 2014-01-06T20:06:48Z How to identify empty expansion slots in netapp https://community.netapp.com/t5/ONTAP-Hardware/How-to-identify-empty-expansion-slots-in-netapp/m-p/34306#M2339 <HTML><HEAD></HEAD><BODY><P>Is there a command to identify empty expansion slots in netapp ?</P></BODY></HTML> Thu, 05 Jun 2025 05:46:12 GMT https://community.netapp.com/t5/ONTAP-Hardware/How-to-identify-empty-expansion-slots-in-netapp/m-p/34306#M2339 RAJATGARG 2025-06-05T05:46:12Z Re: How to identify empty expansion slots in netapp https://community.netapp.com/t5/ONTAP-Hardware/How-to-identify-empty-expansion-slots-in-netapp/m-p/34311#M2340 <HTML><HEAD></HEAD><BODY><P>Try the following:</P><P>1.&nbsp; fcadmin device_map</P><P>2. sasadmin shelf &lt;adapter&gt;</P><P></P><P>The missing numbers (representing disks) should tell you what slots are empty.</P></BODY></HTML> Mon, 06 Jan 2014 20:06:48 GMT https://community.netapp.com/t5/ONTAP-Hardware/How-to-identify-empty-expansion-slots-in-netapp/m-p/34311#M2340 nitish 2014-01-06T20:06:48Z Re: How to identify empty expansion slots in netapp https://community.netapp.com/t5/ONTAP-Hardware/How-to-identify-empty-expansion-slots-in-netapp/m-p/34316#M2341 <HTML><HEAD></HEAD><BODY><P>Assuming a 7 mode system:</P><P>sysconfig -ca will show you what part is in each slot, and by elimination you can tell what slots are free, in my lab slot 3 and 4 are open.&nbsp; This command is great for knowing what the NetApp part number for your cards is as well!</P><P></P><P>Assuming a Clustered OnTap system</P><P>system node run -node &lt;NODENAME&gt; -command sysconfig -ca</P><P></P><P>sysconfig -ca</P><P>sysconfig: slot 5 OK: X1936A: Performance Acceleration Module I</P><P>sysconfig: slot 6 OK: X1107A: Chelsio S320E 2x10G NIC</P><P>sysconfig: slot 1 OK: X3148: NetApp NVRAM6 2GB</P><P>sysconfig: slot 2 OK: X2054A: QLogic ISP 2432; PCI-E quad-port Fibre Channel (QLE2464)</P><P>sysconfig: slot 7 OK: X2054A: QLogic ISP 2432; PCI-E quad-port Fibre Channel (QLE2464)</P><P>sysconfig: slot 8 OK: X2054A: QLogic ISP 2432; PCI-E quad-port Fibre Channel (QLE2464)</P><P></P><P>- Scott</P></BODY></HTML> Thu, 04 Sep 2014 19:14:53 GMT https://community.netapp.com/t5/ONTAP-Hardware/How-to-identify-empty-expansion-slots-in-netapp/m-p/34316#M2341 cscott 2014-09-04T19:14:53Z