topic Re: FAS2020 - Quick question on power to controllers in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/FAS2020-Quick-question-on-power-to-controllers/m-p/2707#M242 <HTML><HEAD></HEAD><BODY><P>Thanks for the quick response!</P></BODY></HTML> Thu, 16 Aug 2012 08:03:23 GMT UNDECIDED 2012-08-16T08:03:23Z FAS2020 - Quick question on power to controllers https://community.netapp.com/t5/ONTAP-Hardware/FAS2020-Quick-question-on-power-to-controllers/m-p/2694#M240 <HTML><HEAD></HEAD><BODY><P>Hi all, just a quick question on the power going to the chassis, does each power cable provide power to an individual controller or to both? I.E if I take one of the two power cables out, will one controller cease to work?</P><P></P><P>If they are individula, then which one controlls which controller? Left power for top controller?</P><P></P><P>thanks</P></BODY></HTML> Thu, 05 Jun 2025 06:20:44 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS2020-Quick-question-on-power-to-controllers/m-p/2694#M240 UNDECIDED 2025-06-05T06:20:44Z Re: FAS2020 - Quick question on power to controllers https://community.netapp.com/t5/ONTAP-Hardware/FAS2020-Quick-question-on-power-to-controllers/m-p/2699#M241 <HTML><HEAD></HEAD><BODY><P>Power supplies are shared and redundant. It will continue to run with one PS for both controllers.</P></BODY></HTML> Thu, 16 Aug 2012 08:02:25 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS2020-Quick-question-on-power-to-controllers/m-p/2699#M241 aborzenkov 2012-08-16T08:02:25Z Re: FAS2020 - Quick question on power to controllers https://community.netapp.com/t5/ONTAP-Hardware/FAS2020-Quick-question-on-power-to-controllers/m-p/2707#M242 <HTML><HEAD></HEAD><BODY><P>Thanks for the quick response!</P></BODY></HTML> Thu, 16 Aug 2012 08:03:23 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS2020-Quick-question-on-power-to-controllers/m-p/2707#M242 UNDECIDED 2012-08-16T08:03:23Z