topic Re: Netapp Disk Replacement in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/Netapp-Disk-Replacement/m-p/35689#M2496 <HTML><HEAD></HEAD><BODY><P>It depends if disk auto assign is on and if a shelf has mixed assignment or not... you can check with "disk show -n" ... the -n will show any unassigned disks.&nbsp; If you see unassigned disks then you know it didn't assign and you manually assign with "disk assign x.xx.x" for individual disks shown or if you know all disks go to one side you can run "disk assign all" to assign all to a controller.</P></BODY></HTML> Fri, 08 Jun 2012 07:14:47 GMT scottgelb 2012-06-08T07:14:47Z Netapp Disk Replacement https://community.netapp.com/t5/ONTAP-Hardware/Netapp-Disk-Replacement/m-p/35684#M2495 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I am running Fas 3240 running ONTAP 7.3</P><P></P><P>Some disks got failed on disk shelves and I replaced them with new ones that I received from Netapp. Do I need to issue any commands for controller to pickup new disks?</P></BODY></HTML> Thu, 05 Jun 2025 06:25:25 GMT https://community.netapp.com/t5/ONTAP-Hardware/Netapp-Disk-Replacement/m-p/35684#M2495 ABHISHEK456 2025-06-05T06:25:25Z Re: Netapp Disk Replacement https://community.netapp.com/t5/ONTAP-Hardware/Netapp-Disk-Replacement/m-p/35689#M2496 <HTML><HEAD></HEAD><BODY><P>It depends if disk auto assign is on and if a shelf has mixed assignment or not... you can check with "disk show -n" ... the -n will show any unassigned disks.&nbsp; If you see unassigned disks then you know it didn't assign and you manually assign with "disk assign x.xx.x" for individual disks shown or if you know all disks go to one side you can run "disk assign all" to assign all to a controller.</P></BODY></HTML> Fri, 08 Jun 2012 07:14:47 GMT https://community.netapp.com/t5/ONTAP-Hardware/Netapp-Disk-Replacement/m-p/35689#M2496 scottgelb 2012-06-08T07:14:47Z