topic Re: After clean configuration FC problem in ONTAP Hardware

After clean configuration FC problem

ilgiz_gantek — Thu, 05 Jun 2025 06:01:26 GMT

Hello all,

I have problem after clean system configuration.

I have FAS2040 systems.

License:

fcp ENBALE

demo02: fcp

fcp: FCP is not licensed.

demo02> fcadmin config

                  Local
Adapter Type      State                  Status
---------------------------------------------------
0a   target     CONFIGURED             offline
0b   target     CONFIGURED             offline

demo02> license delete fcp

license delete: "fcp" is an included feature and cannot be deleted.

demo02>

How I can enable FCP?

Re: After clean configuration FC problem

ilgiz_gantek — Mon, 03 Jun 2013 10:02:34 GMT

Dear All,

Problem solved.

If you have same problem. Please connect to FAS via NetApp OnCommand System and ENABLE FCP license.

From CLI you can't enable FCP license.

I don't know it is bag or feature :-).

Thanks

Re: After clean configuration FC problem

santosf — Mon, 03 Jun 2013 11:02:17 GMT

ilgiz_gantek

Yes you can enable FCP license from the CLI.

using: options licensed_feature.fcp.enable on

Some features on some platform models require that you use the options licensed_feature.featurename. enable commands to enable them instead of entering a license key.