topic Re: LUN and volume mapping in NetApp filer in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/LUN-and-volume-mapping-in-NetApp-filer/m-p/43350#M3012 <HTML><HEAD></HEAD><BODY><P><STRONG>lun show</STRONG> command will help you list out all the lun in the filer. If you want more details about lun you can use<STRONG> lun show -v</STRONG>. if you want to know about which lun is mapping to which host then use <STRONG>lun show -m</STRONG>. If you want to see how many lun in particular volume then use<STRONG> lun show -l volumename</STRONG>. hope this will help.</P><P></P><P>Ye</P></BODY></HTML> Wed, 22 Jan 2014 00:17:59 GMT YEKYAWTHARMYINT 2014-01-22T00:17:59Z LUN and volume mapping in NetApp filer https://community.netapp.com/t5/ONTAP-Hardware/LUN-and-volume-mapping-in-NetApp-filer/m-p/43341#M3010 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>How to get the mapping between LUN and volume on NetApp filer?. </P><P></P><P>Thanks,</P><P>Mohan</P></BODY></HTML> Thu, 05 Jun 2025 05:45:08 GMT https://community.netapp.com/t5/ONTAP-Hardware/LUN-and-volume-mapping-in-NetApp-filer/m-p/43341#M3010 MOHAN1985 2025-06-05T05:45:08Z Re: LUN and volume mapping in NetApp filer https://community.netapp.com/t5/ONTAP-Hardware/LUN-and-volume-mapping-in-NetApp-filer/m-p/43345#M3011 <HTML><HEAD></HEAD><BODY><P>This command will show you all mappings of a node:</P><P>lun show -m </P></BODY></HTML> Tue, 21 Jan 2014 16:05:54 GMT https://community.netapp.com/t5/ONTAP-Hardware/LUN-and-volume-mapping-in-NetApp-filer/m-p/43345#M3011 ELACKINGER_H 2014-01-21T16:05:54Z Re: LUN and volume mapping in NetApp filer https://community.netapp.com/t5/ONTAP-Hardware/LUN-and-volume-mapping-in-NetApp-filer/m-p/43350#M3012 <HTML><HEAD></HEAD><BODY><P><STRONG>lun show</STRONG> command will help you list out all the lun in the filer. If you want more details about lun you can use<STRONG> lun show -v</STRONG>. if you want to know about which lun is mapping to which host then use <STRONG>lun show -m</STRONG>. If you want to see how many lun in particular volume then use<STRONG> lun show -l volumename</STRONG>. hope this will help.</P><P></P><P>Ye</P></BODY></HTML> Wed, 22 Jan 2014 00:17:59 GMT https://community.netapp.com/t5/ONTAP-Hardware/LUN-and-volume-mapping-in-NetApp-filer/m-p/43350#M3012 YEKYAWTHARMYINT 2014-01-22T00:17:59Z