topic Re: There are not enough spare disks error in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/There-are-not-enough-spare-disks-error/m-p/51422#M3624 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I'm new with netapp as well, but what I've understand, there should be two spare (at least one)&nbsp; disks and those spare disks should be simular as your data disks.</P><P></P><P></P><P>Ismo.</P></BODY></HTML> Wed, 04 May 2011 07:37:55 GMT ismopuuronen 2011-05-04T07:37:55Z There are not enough spare disks error https://community.netapp.com/t5/ONTAP-Hardware/There-are-not-enough-spare-disks-error/m-p/51417#M3622 <HTML><HEAD></HEAD><BODY><P>Hi Guys,</P><P></P><P>I've taken over the management&nbsp; NetApp filer, but I don't have a huge amount of experence with NetApp .</P><P></P><P>I've meet the following error:&nbsp; "There are not enough spare disks. /aggr2/plex0/rg4: Please add spare disks supporting block checksums with minimum size: Used 2".</P><P></P><P></P><P>This is on a FAS3050.</P><P></P><P></P><P>Could you give me any suggestions?</P><P></P><P>Aggr2 disk is 15000 rpm, We have 26 10000 rpm spare disks .</P><P></P><P></P><P>Thanks</P></BODY></HTML> Thu, 05 Jun 2025 06:55:25 GMT https://community.netapp.com/t5/ONTAP-Hardware/There-are-not-enough-spare-disks-error/m-p/51417#M3622 XIAOLIN315 2025-06-05T06:55:25Z Re: There are not enough spare disks error https://community.netapp.com/t5/ONTAP-Hardware/There-are-not-enough-spare-disks-error/m-p/51422#M3624 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I'm new with netapp as well, but what I've understand, there should be two spare (at least one)&nbsp; disks and those spare disks should be simular as your data disks.</P><P></P><P></P><P>Ismo.</P></BODY></HTML> Wed, 04 May 2011 07:37:55 GMT https://community.netapp.com/t5/ONTAP-Hardware/There-are-not-enough-spare-disks-error/m-p/51422#M3624 ismopuuronen 2011-05-04T07:37:55Z