topic i in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/i/m-p/5613#M365 <HTML><HEAD></HEAD><BODY><P>Hello All,</P><P>I have just newly attached a new ESH4 to ESH2 on FAS 980C Netapps. I tried to check it to see if the filer head can see it but it was not successful.</P><P>What can I do to make sure the file head can see the added disk shelf.</P><P>Emmanuel</P></BODY></HTML> Thu, 05 Jun 2025 06:46:13 GMT Ogojoseph 2025-06-05T06:46:13Z i https://community.netapp.com/t5/ONTAP-Hardware/i/m-p/5613#M365 <HTML><HEAD></HEAD><BODY><P>Hello All,</P><P>I have just newly attached a new ESH4 to ESH2 on FAS 980C Netapps. I tried to check it to see if the filer head can see it but it was not successful.</P><P>What can I do to make sure the file head can see the added disk shelf.</P><P>Emmanuel</P></BODY></HTML> Thu, 05 Jun 2025 06:46:13 GMT https://community.netapp.com/t5/ONTAP-Hardware/i/m-p/5613#M365 Ogojoseph 2025-06-05T06:46:13Z i https://community.netapp.com/t5/ONTAP-Hardware/i/m-p/5618#M366 <HTML><HEAD></HEAD><BODY><P> You need to make sure that your shelf ID's are set correctly and that the ESH4 shelf is set to 2Gbs for the loop.</P><P>Thank you</P><P>Artur</P></BODY></HTML> Fri, 09 Sep 2011 19:32:06 GMT https://community.netapp.com/t5/ONTAP-Hardware/i/m-p/5618#M366 artur_kusiak 2011-09-09T19:32:06Z