sas admin

ANDY_MCKEE — Thu, 05 Jun 2025 06:06:52 GMT

I notice one of our stacks is reporting a problem with the cable.

Cable attached to SAS port "12d" is functioning in a degraded mode.

looking at sas admin expander. Both shelves show an disabled initatior. Is this something configurable or down to the faulty cable between the 2 shelves?

sasadmin expander 12d.1

WWN 500a09800008d3ff, ID 1, Serial Number '6000024290'

Manufacturer: Vendor 'NETAPP ', Product 'DS224IOM6 ', Rev '0142', Level 2, Slot A

PHY[ 0/P0:0/T]: 6.0 Gb/s, Initiator 500a098000b25d60

PHY[ 1/P0:1/T]: 6.0 Gb/s, Initiator 500a098000b25d60

PHY[ 2/P0:2/T]: 6.0 Gb/s, Initiator 500a098000b25d60

PHY[ 3/P0:3/T]: Disabled

sasadmin expander 12d.2

WWN 500a09800009d13f, ID 2, Serial Number '6000024628'

Manufacturer: Vendor 'NETAPP ', Product 'DS224IOM6 ', Rev '0142', Level 1, Slot A

PHY[ 0/P0:0/T]: 6.0 Gb/s, Expander 500a09800008d3ff

PHY[ 1/P0:1/T]: 6.0 Gb/s, Expander 500a09800008d3ff

PHY[ 2/P0:2/T]: 6.0 Gb/s, Expander 500a09800008d3ff

PHY[ 3/P0:3/T]: 6.0 Gb/s, Expander 500a09800008d3ff

PHY[ 4/P1:0/S]: 6.0 Gb/s, Initiator 500a098000ca725c

PHY[ 5/P1:1/S]: Disabled

PHY[ 6/P1:2/S]: 6.0 Gb/s, Initiator 500a098000ca725c

Thanks in advance

Andy

Re: sas admin

korso — Mon, 25 Mar 2013 14:16:34 GMT

Andrew,

I would open a ticket with NetApp support as soon as possible, they have access to commands within sasadmin that can maullaually enable drive bay and available paths within the SAS stack.

topic sas admin in ONTAP Hardware

sas admin

Re: sas admin