topic FILESYSTEM DISK FAILED on filer in ONTAP Hardware

FILESYSTEM DISK FAILED on filer

TDUBB1234 — Thu, 05 Jun 2025 05:31:29 GMT

I got an error from dfm saying

General Information

-------------------

DataFabric Manager Serial Number: 1-50-111062 Alarm Identifier: 1

Event Fields

-------------

Event Identifier: 36578

Event Name: Disks: Some Failed

Event Description: Status of disk failures on an appliance Event Severity: Error Event Timestamp: 01 Aug 21:14

Source of Event

---------------

Source Identifier: 74

Source Name:

Source Type: Active/Active Controller

Source Status: Error

Event Arguments

---------------

diskMessage: Disk on adapter 2c, shelf 1, bay 1, failed.

how do i find out from the oncommand or command prompt that it did fail? what can i do?

resqme914 — Mon, 04 Aug 2014 15:19:32 GMT

You can look through the messages log file(s) for the failure. In this case, since the error was from last week, check the messages.0 file.

Or if you want to see the current status of the disk, from cli you can do a disk show command, like so:

SAN-1NETAPP04> disk show 5a.00.6

DISK OWNER POOL SERIAL NUMBER HOME

------------ ------------- ----- ------------- -------------

5a.00.6 SAN-1NETAPP04(2015191625) FAILED KPHESN7F SAN-1NETAPP04(2015191625)

SAN-1NETAPP04>

AGUMADAVALLI — Tue, 05 Aug 2014 15:19:16 GMT

vol status -f

and replace the drive, call netapp open up a support case to send the drive and they will replace for you.

Thank you,

AK G