topic Re: Assign disks to both filer. in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/Assign-disks-to-both-filer/m-p/7076#M477 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Yes it is, you can assign spare disks from controller B to controller A using the following command:</P><UL><LI>disk assign DISK_NAME -o DESTINATION_CONTROLLER_NAME -f</LI></UL><P></P><P>Regards,</P><P>Pedro Rocha.</P></BODY></HTML> Wed, 26 Jun 2013 17:05:59 GMT pedro_rocha 2013-06-26T17:05:59Z Assign disks to both filer. https://community.netapp.com/t5/ONTAP-Hardware/Assign-disks-to-both-filer/m-p/7071#M476 <HTML><HEAD></HEAD><BODY><P>FAS2024 is configured as active/active HA.</P><P>I connected a new disk shelf and noticed that owner of that disks on that shelf is Controller B (Filer B).</P><P>I want to assign few disks from that shelf to Controller A, this case to my filer is filer A.</P><P>Is it possibe to do that?</P></BODY></HTML> Thu, 05 Jun 2025 05:59:31 GMT https://community.netapp.com/t5/ONTAP-Hardware/Assign-disks-to-both-filer/m-p/7071#M476 RATNATHURAI 2025-06-05T05:59:31Z Re: Assign disks to both filer. https://community.netapp.com/t5/ONTAP-Hardware/Assign-disks-to-both-filer/m-p/7076#M477 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Yes it is, you can assign spare disks from controller B to controller A using the following command:</P><UL><LI>disk assign DISK_NAME -o DESTINATION_CONTROLLER_NAME -f</LI></UL><P></P><P>Regards,</P><P>Pedro Rocha.</P></BODY></HTML> Wed, 26 Jun 2013 17:05:59 GMT https://community.netapp.com/t5/ONTAP-Hardware/Assign-disks-to-both-filer/m-p/7076#M477 pedro_rocha 2013-06-26T17:05:59Z