topic Re: 10gBit LACP VIFs and partner failover confiuration in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/10gBit-LACP-VIFs-and-partner-failover-confiuration/m-p/70021#M4943 <HTML><HEAD></HEAD><BODY><P>You need to configure VLAN interfaces for failover.</P></BODY></HTML> Thu, 09 Jun 2011 03:11:24 GMT aborzenkov 2011-06-09T03:11:24Z 10gBit LACP VIFs and partner failover confiuration https://community.netapp.com/t5/ONTAP-Hardware/10gBit-LACP-VIFs-and-partner-failover-confiuration/m-p/70016#M4942 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>We've got a couple 3140s, with a 10GBit LACP VIF which in turn serves dozens of VLAN interfaces. The VIF itself has no IP addresses on it.</P><P></P><P>What's the correct RC file syntax to define the partner interface and ensure failover will take place? Is it enough to configure it on the VIF itself, or on each VLAN interface?</P></BODY></HTML> Thu, 05 Jun 2025 06:53:11 GMT https://community.netapp.com/t5/ONTAP-Hardware/10gBit-LACP-VIFs-and-partner-failover-confiuration/m-p/70016#M4942 cathednet 2025-06-05T06:53:11Z Re: 10gBit LACP VIFs and partner failover confiuration https://community.netapp.com/t5/ONTAP-Hardware/10gBit-LACP-VIFs-and-partner-failover-confiuration/m-p/70021#M4943 <HTML><HEAD></HEAD><BODY><P>You need to configure VLAN interfaces for failover.</P></BODY></HTML> Thu, 09 Jun 2011 03:11:24 GMT https://community.netapp.com/t5/ONTAP-Hardware/10gBit-LACP-VIFs-and-partner-failover-confiuration/m-p/70021#M4943 aborzenkov 2011-06-09T03:11:24Z