topic Re: Partner not correctly configured, needs to be erased. in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/Partner-not-correctly-configured-needs-to-be-erased/m-p/70711#M5003 <HTML><HEAD></HEAD><BODY><P>Just to clarify:</P><P></P><P>You're already gone through the basic install portion and given both of the filers IPs?</P><P>Can you log into both of them individually through SSH?</P></BODY></HTML> Thu, 31 Mar 2011 17:43:38 GMT rwelshman 2011-03-31T17:43:38Z Partner not correctly configured, needs to be erased. https://community.netapp.com/t5/ONTAP-Hardware/Partner-not-correctly-configured-needs-to-be-erased/m-p/70707#M5002 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>first of all let me say that i am a newbie in Netapp systems.</P><P>I have a FAS2020 with two controllers.</P><P>I have done the initial configuration on both controllers, downloaded SystemManager and trying to configure the system.</P><P>The problem is that when i am trying to add one of the two controllers and after putting in the IP i get a message that i need to fill in the partner ip. Whatever i put i get an error saying that cannot find the partner.</P><P>I tried through CLI giving ifconfig e0a -partner which gives ifconfig: partner not found.</P><P>How can i disable the partner which i don't intend to use?</P><P></P><P>Thanks</P></BODY></HTML> Thu, 05 Jun 2025 06:57:20 GMT https://community.netapp.com/t5/ONTAP-Hardware/Partner-not-correctly-configured-needs-to-be-erased/m-p/70707#M5002 SVIZIKIDIS 2025-06-05T06:57:20Z Re: Partner not correctly configured, needs to be erased. https://community.netapp.com/t5/ONTAP-Hardware/Partner-not-correctly-configured-needs-to-be-erased/m-p/70711#M5003 <HTML><HEAD></HEAD><BODY><P>Just to clarify:</P><P></P><P>You're already gone through the basic install portion and given both of the filers IPs?</P><P>Can you log into both of them individually through SSH?</P></BODY></HTML> Thu, 31 Mar 2011 17:43:38 GMT https://community.netapp.com/t5/ONTAP-Hardware/Partner-not-correctly-configured-needs-to-be-erased/m-p/70711#M5003 rwelshman 2011-03-31T17:43:38Z