topic Re: Moving Boot Volume to Different Aggregate in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/Moving-Boot-Volume-to-Different-Aggregate/m-p/71590#M5031 <HTML><HEAD></HEAD><BODY><P>There's a procedure for moving the root volume on a V-Series platform here:</P><P></P><P><A href="http://now.netapp.com/NOW/knowledge/docs/ontap/rel73_vs/html/v-series/ig_disk/moveroot.htm" target="_blank">http://now.netapp.com/NOW/knowledge/docs/ontap/rel73_vs/html/v-series/ig_disk/moveroot.htm</A></P><P></P><P>It comes from the same manual you were looking at as a reference.</P><P></P><P>Is this what you were looking for? Also, are you using a V-Series platform or traditional NetApp controller?</P></BODY></HTML> Fri, 16 Jan 2009 21:27:47 GMT rmatt 2009-01-16T21:27:47Z Moving Boot Volume to Different Aggregate https://community.netapp.com/t5/ONTAP-Hardware/Moving-Boot-Volume-to-Different-Aggregate/m-p/71585#M5030 <HTML><HEAD></HEAD><BODY><P>Could someone point me to a procedure for moving the boot volume to another aggregate? (Is it simply the same as moving to another volume on the same aggregate?) I found this <A href="http://now.netapp.com/NOW/knowledge/docs/ontap/rel73_vs/html/v-series/ig_disk/move-sh2.htm" target="_blank">http://now.netapp.com/NOW/knowledge/docs/ontap/rel73_vs/html/v-series/ig_disk/move-sh2.htm</A> so it seems doable. There is the option for root aggr as well, but we are warned not to change that without implicit instructions to do so. </P></BODY></HTML> Thu, 05 Jun 2025 07:31:39 GMT https://community.netapp.com/t5/ONTAP-Hardware/Moving-Boot-Volume-to-Different-Aggregate/m-p/71585#M5030 kevinstay 2025-06-05T07:31:39Z Re: Moving Boot Volume to Different Aggregate https://community.netapp.com/t5/ONTAP-Hardware/Moving-Boot-Volume-to-Different-Aggregate/m-p/71590#M5031 <HTML><HEAD></HEAD><BODY><P>There's a procedure for moving the root volume on a V-Series platform here:</P><P></P><P><A href="http://now.netapp.com/NOW/knowledge/docs/ontap/rel73_vs/html/v-series/ig_disk/moveroot.htm" target="_blank">http://now.netapp.com/NOW/knowledge/docs/ontap/rel73_vs/html/v-series/ig_disk/moveroot.htm</A></P><P></P><P>It comes from the same manual you were looking at as a reference.</P><P></P><P>Is this what you were looking for? Also, are you using a V-Series platform or traditional NetApp controller?</P></BODY></HTML> Fri, 16 Jan 2009 21:27:47 GMT https://community.netapp.com/t5/ONTAP-Hardware/Moving-Boot-Volume-to-Different-Aggregate/m-p/71590#M5031 rmatt 2009-01-16T21:27:47Z