topic Re: FAS2040HA + 2x DS14mk2 + 1x DS4243: is it supported? in ONTAP Hardware

FAS2040HA + 2x DS14mk2 + 1x DS4243: is it supported?

neves_jacques — Thu, 05 Jun 2025 06:56:17 GMT

Good Morning,

Is It supported to connect on a FAS2040HA, 2x DS14mk2 and 1x DS4243 in order to move the data between the DS14mk2 / DS4243?

I don't see this configuration on the document "Configuration Rules and Examples for FAS20xx Systems" (215-03642_D0.pdf).

I wish to move the date from the aggregate on the 2x DS14mk2 to a new aggregate on the 1x DS4243.

I plan to remove the 2x DS14mk2 after the migration on the DS4243.

Thanks in advance for your feedback.

Regards,

JNV

baijulal — Thu, 21 Apr 2011 18:22:36 GMT

DS4243 needed to attached to SAS port and DS14mk2 (2 in one stack)to the FC port on the contoller.

It should work.

neves_jacques — Thu, 12 May 2011 19:07:43 GMT

Thanks 😉

I have just done the intervention and it works.

Regards,

JNV