topic V-Series Brocade FMC - port based or WWN based zoning? in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/V-Series-Brocade-FMC-port-based-or-WWN-based-zoning/m-p/73766#M5166 <HTML><HEAD></HEAD><BODY><P>Which one is supported/recommended? Documentation does not really say which one to use, just that which end devices should be put in the same zone. </P><P></P><P>Also IIRC Cisco does not even support port based zoning so I assume WWN zoning should at least be supported.</P></BODY></HTML> Thu, 05 Jun 2025 06:07:03 GMT aborzenkov 2025-06-05T06:07:03Z V-Series Brocade FMC - port based or WWN based zoning? https://community.netapp.com/t5/ONTAP-Hardware/V-Series-Brocade-FMC-port-based-or-WWN-based-zoning/m-p/73766#M5166 <HTML><HEAD></HEAD><BODY><P>Which one is supported/recommended? Documentation does not really say which one to use, just that which end devices should be put in the same zone. </P><P></P><P>Also IIRC Cisco does not even support port based zoning so I assume WWN zoning should at least be supported.</P></BODY></HTML> Thu, 05 Jun 2025 06:07:03 GMT https://community.netapp.com/t5/ONTAP-Hardware/V-Series-Brocade-FMC-port-based-or-WWN-based-zoning/m-p/73766#M5166 aborzenkov 2025-06-05T06:07:03Z Re: V-Series Brocade FMC - port based or WWN based zoning? https://community.netapp.com/t5/ONTAP-Hardware/V-Series-Brocade-FMC-port-based-or-WWN-based-zoning/m-p/73771#M5167 <HTML><HEAD></HEAD><BODY><P>Forget this. Just read</P><PRE __jive_macro_name="quote" class="jive_text_macro jive_macro_quote" modifiedtitle="true">You must configure the zones using Domain IDs and port numbers; you cannot use the PWWN.</PRE><P>Case closed <SPAN __jive_emoticon_name="happy" __jive_macro_name="emoticon" class="jive_macro jive_emote" src="https://community.netapp.com/5.0.1/images/emoticons/happy.gif"></SPAN></P></BODY></HTML> Thu, 21 Mar 2013 07:30:43 GMT https://community.netapp.com/t5/ONTAP-Hardware/V-Series-Brocade-FMC-port-based-or-WWN-based-zoning/m-p/73771#M5167 aborzenkov 2013-03-21T07:30:43Z