Able to SNMPwalk on a single controller only,even we configured SNMP on both the controller .

VAJRALA_RAVEENDRA — Thu, 05 Jun 2025 06:07:36 GMT

Hi Team,

In my environment we are using 2 NetApp FAS 2240 model each contain 2 active/active controllers . For monitoring purpose we have enabled SNMP on all 4 controllers but we are able to SNMPWALK on a single controller on each device not on anther controller in a storage device .

We are unable to do SNMPWALK on both the controllers even we configured the SNMP on both .(Here with 1a controller IP SNMPWALK data not getting ,we are able to get SNMP data with IP of 1b controller ). same problem with 2nd NetApp device also .

FYI

both controllers are in active/active fail-over mode .and through single controller Ip getting both controller data in SNMPWALK .

below is the way i configure SNMP in all controller

----------------------------------------

snmp init 0

options snmp.enable off

snmp contact support@mail.com

snmp location location name # add respective location name

snmp traphost add 192.168.X.XX

snmp community add ro public

snmp traphost add 192.168.X.XX

options snmp.enable on

snmp init 1

------------------------------------------

#snmpwalk -v2c -c public <1b_controller ip> (getting snmp data )

#snmpwalk -v2c -c public <1a_controller ip> (Not getting snmp data )

--------------------------------------------------

Please Help me out , How can i get the SNMP data through second controller also ??

Please le me know if any information needed from my side .

Thank you in advance

vajrala

Re: Able to SNMPwalk on a single controller only,even we configured SNMP on both the controller .

VAJRALA_RAVEENDRA — Thu, 14 Mar 2013 14:19:54 GMT

Can any one guide me??.

Re: Able to SNMPwalk on a single controller only,even we configured SNMP on both the controller .

VAJRALA_RAVEENDRA — Fri, 15 Mar 2013 12:08:22 GMT

Any help on this ??

I am not sure i posted in right community or not.

Re: Able to SNMPwalk on a single controller only,even we configured SNMP on both the controller .

DOUGLASSIGGINS — Mon, 18 Mar 2013 19:46:53 GMT

This is pretty obvious but you have the option above set incorrectly:

options snmp.enable should be set to :

options snmp.enable

snmp.enable on

Hopefully its not that easy

topic Re: Able to SNMPwalk on a single controller only,even we configured SNMP on both the controller . in ONTAP Hardware

Able to SNMPwalk on a single controller only,even we configured SNMP on both the controller .

Re: Able to SNMPwalk on a single controller only,even we configured SNMP on both the controller .

Re: Able to SNMPwalk on a single controller only,even we configured SNMP on both the controller .

Re: Able to SNMPwalk on a single controller only,even we configured SNMP on both the controller .