topic 6040 HA configuration in ONTAP Hardware https://community.netapp.com/t5/ONTAP-Hardware/6040-HA-configuration/m-p/77038#M5435 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>I’ve inherited an old 6040 with 4 shelves running ONTAP 7.3.&nbsp; The problem I’ve encountered and can’t seem to get past is enabling HA. Cluster licensing has been enabled on both nodes but I keep seeing CF not initialized.&nbsp; Cabling seems to be correct and I have the HA cables connected properly as I get a green light on the HA card but no yellow light indicating communication.</P><P>Upon rebooting one of the nodes I noticed the following error:</P><P></P><P>cf.fm.missingAdapter:error]: Warning:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; clustering is licensed yet an interconnect adapter was not found</P><P></P><P>I then ran a sysconfig –a and retrieved the following information:</P><P></P><P>slot 2: NVRAM (NetApp NVRAM VI)</P><P> Revision:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; G0</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Serial Number:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 628106</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Memory Size:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 512 MB</P><P> Battery 1 Status:&nbsp;&nbsp; OK (4032 mV)</P><P> Charger 1 Status:&nbsp;&nbsp; OFF</P><P> Running Firmware:&nbsp;&nbsp; 9 (4.7.600)</P><P> Cluster Interconnect Port 1: copper</P><P> Cluster Interconnect Port 2: copper</P><P> memory mapped I/O base 0xc1000000, size 0x100000</P><P> prefetchable memory base 0xc0800000, size 0x800000</P><P> prefetchable memory base 0x3100000000, size 0x20000000</P><P></P><P>It would seem that the system is detecting the interconnect card but it’s not working.&nbsp; Is there a special command to enable the card? (because if there is I haven't found it).&nbsp; I find it strange that both nodes are behaving the same way with the interconnect cards.</P><P></P><P>Any ideas??</P><P></P><P><SPAN style="font-size: 10pt; line-height: 1.5em;">Thanks.</SPAN></P></BODY></HTML> Thu, 05 Jun 2025 05:32:44 GMT AJURADO25 2025-06-05T05:32:44Z 6040 HA configuration https://community.netapp.com/t5/ONTAP-Hardware/6040-HA-configuration/m-p/77038#M5435 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>I’ve inherited an old 6040 with 4 shelves running ONTAP 7.3.&nbsp; The problem I’ve encountered and can’t seem to get past is enabling HA. Cluster licensing has been enabled on both nodes but I keep seeing CF not initialized.&nbsp; Cabling seems to be correct and I have the HA cables connected properly as I get a green light on the HA card but no yellow light indicating communication.</P><P>Upon rebooting one of the nodes I noticed the following error:</P><P></P><P>cf.fm.missingAdapter:error]: Warning:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; clustering is licensed yet an interconnect adapter was not found</P><P></P><P>I then ran a sysconfig –a and retrieved the following information:</P><P></P><P>slot 2: NVRAM (NetApp NVRAM VI)</P><P> Revision:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; G0</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Serial Number:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 628106</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Memory Size:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 512 MB</P><P> Battery 1 Status:&nbsp;&nbsp; OK (4032 mV)</P><P> Charger 1 Status:&nbsp;&nbsp; OFF</P><P> Running Firmware:&nbsp;&nbsp; 9 (4.7.600)</P><P> Cluster Interconnect Port 1: copper</P><P> Cluster Interconnect Port 2: copper</P><P> memory mapped I/O base 0xc1000000, size 0x100000</P><P> prefetchable memory base 0xc0800000, size 0x800000</P><P> prefetchable memory base 0x3100000000, size 0x20000000</P><P></P><P>It would seem that the system is detecting the interconnect card but it’s not working.&nbsp; Is there a special command to enable the card? (because if there is I haven't found it).&nbsp; I find it strange that both nodes are behaving the same way with the interconnect cards.</P><P></P><P>Any ideas??</P><P></P><P><SPAN style="font-size: 10pt; line-height: 1.5em;">Thanks.</SPAN></P></BODY></HTML> Thu, 05 Jun 2025 05:32:44 GMT https://community.netapp.com/t5/ONTAP-Hardware/6040-HA-configuration/m-p/77038#M5435 AJURADO25 2025-06-05T05:32:44Z Re: 6040 HA configuration https://community.netapp.com/t5/ONTAP-Hardware/6040-HA-configuration/m-p/77043#M5436 <HTML><HEAD></HEAD><BODY><P>According to the system configuration guide (no longer available online) and the /etc/sysconfigtab files, for a 6040HA, the NVRAM card has to go in slot 1 for HA. If it's in slot 2, it's a stand-alone configuration. Try swapping the card into slot 1 and see if that helps</P><P></P><P>If not, please post the complete boot messages that the system spits out, as well as the "sysconfig -av" and "sysconfig -cv" output</P><P></P><P>-Michael</P></BODY></HTML> Fri, 25 Jul 2014 12:02:51 GMT https://community.netapp.com/t5/ONTAP-Hardware/6040-HA-configuration/m-p/77043#M5436 Darkstar 2014-07-25T12:02:51Z Re: 6040 HA configuration https://community.netapp.com/t5/ONTAP-Hardware/6040-HA-configuration/m-p/77047#M5437 <HTML><HEAD></HEAD><BODY><P>Information about PCI Slots assignment is now maintained in HWU and is online.</P></BODY></HTML> Fri, 25 Jul 2014 12:04:41 GMT https://community.netapp.com/t5/ONTAP-Hardware/6040-HA-configuration/m-p/77047#M5437 aborzenkov 2014-07-25T12:04:41Z