LACP interface status : lag_inactive

MACAKIGO1 — Sat, 24 Jan 2015 23:04:09 GMT

Hello All,

We stuck with investigation of one issue related with LACP
One port is failing to receive successive LACP protocol packets and staying in lag_inactive status.
netapp controller is sending LACP packets but doesn't receiving them from the switch.
Same behavior we can see on network switch(PDUs sent are increasing , however received PDUs are staying in same value).

We tried to reset interface but it didn't help.
our environment
FAS: FAS6210
network card: 10 Gigabit Ethernet Controller IX1-SFP+
ontap version: 8.2.1 7-Mode

switch is running :

Cisco Nexus Operating System (NX-OS) Software 5.2(7)

here is output from "vif status"
attached lacp_log file

ifgrp: command "vif" is deprecated in favor of command "ifgrp"
default: transmit 'IP Load balancing', Ifgrp Type 'multi_mode', fail 'log'
nas0: 1 link, transmit 'IP Load balancing', Ifgrp Type 'lacp' fail 'default'
Ifgrp Status Up Addr_set
up:
e0c: state up, since 28Nov2014 15:15:56 (48+23:04:26)
mediatype: auto-10g_sr-fd-up
flags: enabled
active aggr, aggr port: e0c
input packets 3239494, input bytes 4206978780
input lacp packets 619824, output lacp packets 620745
output packets 14182685, output bytes 20061316275
up indications 6, broken indications 0
drops (if) 0, drops (link) 0
indication: up at 28Nov2014 15:15:56
consecutive 0, transitions 6
lag_inactive:
e0e: state lag_inactive, since 16Jan2015 10:19:57 (04:00:25)
mediatype: auto-10g_sr-fd-up
flags: lacp enabled
input packets 0, input bytes 0
input lacp packets 351670, output lacp packets 8406748
output packets 0, output bytes 0
up indications 9, broken indications 6
drops (if) 0, drops (link) 0

ifstat of affected interface

-- interface e0e (0 hours, 10 minutes, 7 seconds) --

Thanks

Re: LACP interface status : lag_inactive

MACAKIGO1 — Thu, 19 Feb 2015 12:25:24 GMT

This issue has been resolved by takoover/giveback.

Re: LACP interface status : lag_inactive

RUDeBega — Thu, 03 Dec 2015 18:31:42 GMT

Having the LACP PDU issue which the article says is solved. The link for the solution appears not to work. What is the solution?

topic LACP interface status : lag_inactive in ONTAP Hardware

LACP interface status : lag_inactive

Re: LACP interface status : lag_inactive

Re: LACP interface status : lag_inactive