https://community.netapp.com/t5/ONTAP-Hardware/FAS-2552-Power-Supply/m-p/108676#M6770 <P>Yes. 100-120 and 200-240.&nbsp; hwu.netapp.com has info on all platforms...great resource for specifications and everything supported on each platform.</P> Fri, 14 Aug 2015 18:41:39 GMT scottgelb 2015-08-14T18:41:39Z https://community.netapp.com/t5/ONTAP-Hardware/FAS-2552-Power-Supply/m-p/108666#M6769 <P>Good day All.&nbsp;</P><P>Does anyone know if the Power Supplies in FAS2552 are autosensing, that means can I plug them into 100 or 220 v?</P><P>Is there a Paper that explains it?</P><P>Thanks a lot.</P> Wed, 04 Jun 2025 23:31:39 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS-2552-Power-Supply/m-p/108666#M6769 nachito 2025-06-04T23:31:39Z https://community.netapp.com/t5/ONTAP-Hardware/FAS-2552-Power-Supply/m-p/108676#M6770 <P>Yes. 100-120 and 200-240.&nbsp; hwu.netapp.com has info on all platforms...great resource for specifications and everything supported on each platform.</P> Fri, 14 Aug 2015 18:41:39 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS-2552-Power-Supply/m-p/108676#M6770 scottgelb 2015-08-14T18:41:39Z https://community.netapp.com/t5/ONTAP-Hardware/FAS-2552-Power-Supply/m-p/108686#M6771 It is not very obvious, at least mobile version. It never really says there is single power supply for both cases. Actually, it lists two FRU numbers for PSU without much info what the difference is. Fri, 14 Aug 2015 21:09:02 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS-2552-Power-Supply/m-p/108686#M6771 aborzenkov 2015-08-14T21:09:02Z