https://community.netapp.com/t5/ONTAP-Hardware/incorrect-failover-group-on-2552/m-p/120099#M7434 <P>check below links to see if anything wrong:</P><P><A href="https://kb.netapp.com/support/index?page=content&amp;id=1014702" target="_blank">https://kb.netapp.com/support/index?page=content&amp;id=1014702</A></P><P><A href="http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&amp;Display=862679" target="_blank">http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&amp;Display=862679</A></P><P><A href="https://library.netapp.com/ecmdocs/ECMP1256807/html/GUID-122C817D-275D-4012-B545-A6C4C613CB7C.html" target="_blank">Creating failover groups</A></P><P><A href="https://library.netapp.com/ecmdocs/ECMP1636021/html/GUID-CB9BD2E2-D085-446E-8EB2-6BF609E42ABA.html" target="_blank">Configuring broadcast domains</A></P> Fri, 10 Jun 2016 04:07:05 GMT Jeff_Yao 2016-06-10T04:07:05Z https://community.netapp.com/t5/ONTAP-Hardware/incorrect-failover-group-on-2552/m-p/119785#M7414 <P>under risks in system health in autosupport on my FAS2552 running 8.2.2RC1&nbsp;clustermode I have an alert that says "LIF(s) BCSD-HS-VDI-nfs_lif1 has/have an incorrect failover-group".</P><P>Running:</P><P>BCSD-HS::&gt; net interface show -vserver BCSD-HS-VDI -lif BCSD-HS-VDI_nfs_lif1 -failover</P><P>yields failover group "system-defined".</P><P>Among the failover targets are e0a and e0b which are not connected to anything. Is this why I'm getting the alert? Does it matter? Should I disable those ports to correct this?</P><P>&nbsp;</P> Wed, 04 Jun 2025 20:40:48 GMT https://community.netapp.com/t5/ONTAP-Hardware/incorrect-failover-group-on-2552/m-p/119785#M7414 ghalbedel 2025-06-04T20:40:48Z https://community.netapp.com/t5/ONTAP-Hardware/incorrect-failover-group-on-2552/m-p/120099#M7434 <P>check below links to see if anything wrong:</P><P><A href="https://kb.netapp.com/support/index?page=content&amp;id=1014702" target="_blank">https://kb.netapp.com/support/index?page=content&amp;id=1014702</A></P><P><A href="http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&amp;Display=862679" target="_blank">http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&amp;Display=862679</A></P><P><A href="https://library.netapp.com/ecmdocs/ECMP1256807/html/GUID-122C817D-275D-4012-B545-A6C4C613CB7C.html" target="_blank">Creating failover groups</A></P><P><A href="https://library.netapp.com/ecmdocs/ECMP1636021/html/GUID-CB9BD2E2-D085-446E-8EB2-6BF609E42ABA.html" target="_blank">Configuring broadcast domains</A></P> Fri, 10 Jun 2016 04:07:05 GMT https://community.netapp.com/t5/ONTAP-Hardware/incorrect-failover-group-on-2552/m-p/120099#M7434 Jeff_Yao 2016-06-10T04:07:05Z