Monitoring FAS2050 by SCOM 2012 R2

AlbertT — Wed, 04 Jun 2025 19:41:05 GMT

Hi，All:

i'm using the SCOM2012 R2 to monitor my storage-NetApp FAS2050, Following the USER GUIDE，i installed the SCOM-Management-Pack-WSX64-03.00.0002.3000 to RMS and one Agent-Managed server.As the USER GUIDE said ,the next step is to add the array by using the 'NetApp Storage Array Discovery' ,but i failed in this step,i running the discover program and add the controller 1&2 address,it comes an error(No storage array Found).PIng the ip address is ok。the ip of FAS2050 is 172.16.11.11&172.16.11.12 ,and the ip of RMS and Agent-Managed server is 172.24.62.82/172.24.62.90。i run the discover program on the Agent-Managed server.Did i do something wrong?Need some help.

Best regards

Re: Monitoring FAS2050 by SCOM 2012 R2

hariprak — Fri, 05 Aug 2016 08:37:58 GMT

Hi,

Hope this best practice guide helps,

http://www.netapp.com/us/media/tr-4354.pdf

Thanks

topic Monitoring FAS2050 by SCOM 2012 R2 in ONTAP Hardware

Monitoring FAS2050 by SCOM 2012 R2

Re: Monitoring FAS2050 by SCOM 2012 R2