topic Re: FAS 2552 add shelf with encrypted drives in ONTAP Hardware

FAS 2552 add shelf with encrypted drives

CTAVERAS200 — Wed, 04 Jun 2025 18:35:23 GMT

So I have been going back and forth with Netapp and a Vendor of ours. I am trying to get an answer to this questoion.

I have a 2552 controller with an additional shelf (DS2246) fully populate. I want to buy an additional ds2246 but with these self encrypting drives i hear Netapp has.

I am being told that I cannot add tihs shelf if all the drives in the controller and existing shelf are not already populated with these drives.

I am at a loss why I cannot just create a whole new AGGR soley of these encrypted drives? I do not want to add these drives to the existing AGGR.

Can anyone shed some light on whether this is possible in Data OnTap 8.3.2 p6 or Data OnTap 9

My plan is to move our CIFS shares to have the data encrypted at rest.

Re: FAS 2552 add shelf with encrypted drives

Sahana — Thu, 20 Oct 2016 05:18:33 GMT

Hi,

In order to have both NSE and non-NSE drives in the same cluster, you will have to have at least a 4-node cluster. One HA-pair will be non-NSE, and the other ha-pair would be NSE drives.

After that you could then serve both encrypted and non-encrypted data from a single SVM.

You can not mix NSE and non-NSE drives in the same node or ha-pair.

Re: FAS 2552 add shelf with encrypted drives

thomasb82 — Sun, 23 Oct 2016 19:25:31 GMT

Maybe also working for you: upgrade to 9.1 and use software based encryption.

Re: FAS 2552 add shelf with encrypted drives

CTAVERAS200 — Wed, 26 Oct 2016 12:24:45 GMT

I was told the although my FAS2552 supports Cluster Data On Tao 9.1 it does not support Software Encryption?