https://community.netapp.com/t5/ONTAP-Hardware/FAS2650-consol-port/m-p/134154#M8362 <P><A href="https://library.netapp.com/ecm/ecm_download_file/ECMLP2316768" target="_blank">https://library.netapp.com/ecm/ecm_download_file/ECMLP2316768</A></P> <P>search "console"</P> Fri, 01 Sep 2017 11:29:27 GMT Jeff_Yao 2017-09-01T11:29:27Z https://community.netapp.com/t5/ONTAP-Hardware/FAS2650-consol-port/m-p/133832#M8312 <P>Hello everyone,</P><P>&nbsp;</P><P>I powered on my neww FAS2650 after cabling, but when i want to access to the system by console port in first time it display that the system is initialising as showing in picture, after that nothing it is happening .I want to do the first configuration of the system(cluster,mgmt interface ...).</P><P>&nbsp;</P><P>Thanks alot.</P> Wed, 04 Jun 2025 14:42:09 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS2650-consol-port/m-p/133832#M8312 bahmed 2025-06-04T14:42:09Z https://community.netapp.com/t5/ONTAP-Hardware/FAS2650-consol-port/m-p/134154#M8362 <P><A href="https://library.netapp.com/ecm/ecm_download_file/ECMLP2316768" target="_blank">https://library.netapp.com/ecm/ecm_download_file/ECMLP2316768</A></P> <P>search "console"</P> Fri, 01 Sep 2017 11:29:27 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS2650-consol-port/m-p/134154#M8362 Jeff_Yao 2017-09-01T11:29:27Z https://community.netapp.com/t5/ONTAP-Hardware/FAS2650-consol-port/m-p/134177#M8363 <P>New Netapp Controller have Baud Rate as 115200</P><P>The old system had the Baud Rate as 9600&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P><P>Attached is my secure CRT connection settings.</P><P><IMG src="https://community.netapp.com/t5/image/serverpage/image-id/7575i00E1E8F67108A254/image-size/original?v=1.0&amp;px=-1" border="0" alt="Screen Shot 2017-09-01 at 5.10.27 PM.png" title="Screen Shot 2017-09-01 at 5.10.27 PM.png" /></P> Sat, 02 Sep 2017 00:12:08 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS2650-consol-port/m-p/134177#M8363 robinpeter 2017-09-02T00:12:08Z