topic Advance Drive Paritioning on a new FAS 8040 running9.2.1 in ONTAP Hardware

Advance Drive Paritioning on a new FAS 8040 running9.2.1

kdean1979 — Wed, 04 Jun 2025 14:26:26 GMT

Good afternoon,

I am looking for a document that details how to implement ADP v2 on a FAS 8040 running 9.2P1. There is no data on this system so it can be wipted. Just looking for how to configure it.

Thanks

Kathy

Re: Advance Drive Paritioning on a new FAS 8040 running9.2.1

andris — Thu, 26 Oct 2017 15:48:56 GMT

Only AFF systems support ADP v2 (root-data-data) partitioning.

Since you're on ONTAP 9.2+, to get the "right" ADP setup for your system, just run Option 9b from BOTH HA partners.

Re: Advance Drive Paritioning on a new FAS 8040 running9.2.1

kdean1979 — Thu, 26 Oct 2017 16:25:01 GMT

Thank you but what is option 9B?

Re: Advance Drive Paritioning on a new FAS 8040 running9.2.1

andris — Thu, 26 Oct 2017 17:13:10 GMT

Sorry for the cryptic response!

Option 9 (and 9b) is in the boot menu of ONTAP. You would press "Ctrl-C" from the console when starting up ONTAP to access it:

Boot menu info: http://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-sag/GUID-B86616AE-D345-4B44-AA56-BBC7ABD44068.html

Additional root-data partitioning management options

Re: Advance Drive Paritioning on a new FAS 8040 running9.2.1

kdean1979 — Thu, 26 Oct 2017 17:47:18 GMT

Please look at the link you sent me. There is no option 9

Re: Advance Drive Paritioning on a new FAS 8040 running9.2.1

andris — Thu, 26 Oct 2017 18:03:37 GMT

The 1st link was meant to give guidance on how to reach the boot menu. The screenshot in that link is not based on ONTAP 9.2 (when option 9 was introduced).

The 2nd link is the release note item discussing ADP boot menu (Option 9).

I should have just provided you this KB article link, in retrospect:

https://kb.netapp.com/support/s/article/ka21A000000DFjY/ONTAP-Boot-Menu-Option-9-Configure-Advanced-Drive-Partitioning

Re: Advance Drive Paritioning on a new FAS 8040 running9.2.1

kdean1979 — Thu, 26 Oct 2017 18:14:23 GMT

PERFECTO! I rebooted back into Maintenance Mode and have Option 9. Will go thru those steps in the article.

Thank you!

Re: Advance Drive Paritioning on a new FAS 8040 running9.2.1

XBR500 — Fri, 13 Jul 2018 06:03:11 GMT

There is a complication when using half shelves of SSDs as option 9B fails.

See this KB:-

https://kb.netapp.com/app/answers/answer_view/a_id/1080864