FAS8200 e0e|0e Simultaneously

nicholsongc — Wed, 04 Jun 2025 13:50:39 GMT

We have a pair of FAS8200s (Ontap 9.1) currently serving FCoE LUNs over the UTA2 ports e0e|0e and e0f|0f

Based on confirmation from support I understand that I can use these ports for both FCoE and CIFS traffic simultaneously

My questions, assuming that is indeed a correct answer, are:

1. Is is possible to create an ifgrp consisting of e0e/e0f if the 0e and 0f ports are alresady configured for FCoE LIFs.

2. Is #1 above recommended since they reside on the same ASIC?

3. What is the basic guidance for switch port provisioning (Cisco 7K core switches) to accomodate both FCoE and NAS Ethernet traffic?

Advice is all I'm seeking here - not a runbook - so any and all responses are sincerely welcome.

Re: FAS8200 e0e|0e Simultaneously

aborzenkov — Fri, 06 Apr 2018 05:18:00 GMT

I am pretty positive that multi-mode ifgrp won’t work (or better will impact FCoE part). Single node may work, but does not really offer you more than normal LIF failover does anyway.

topic FAS8200 e0e|0e Simultaneously in ONTAP Hardware

FAS8200 e0e|0e Simultaneously

Re: FAS8200 e0e|0e Simultaneously