topic Re: E-SERIES SIMULATOR ISCSI HOST PORT IS DISCONNECTED in ONTAP Hardware

E-SERIES SIMULATOR ISCSI HOST PORT IS DISCONNECTED

oscaraock — Wed, 04 Jun 2025 13:46:12 GMT

Hi Guys,

Recentlly Ive installed the E-Series Simultator 11.40 but Im trying with the different arrays but all arrays shows the ISCSI Host Ports "Disconnected" and it not able to test LUNs.

May this is a mine error or is necessary adjust something (I've tried with Win10 and Win2012, uncompressed the files over C:

Re: E-SERIES SIMULATOR ISCSI HOST PORT IS DISCONNECTED

AlexDawson — Wed, 02 May 2018 05:12:01 GMT

Hi there,

This isn't my specialty, but have you checked you have ping connectivity between your hosts and the simulator? That would be the first thing to check.

Re: E-SERIES SIMULATOR ISCSI HOST PORT IS DISCONNECTED

oscaraock — Fri, 04 May 2018 15:58:57 GMT

Hi Alex,

The ping dont answer, the iscsi interfaces of the simulator are all down, the only interface up is the management.

In a real machine with the interfaces connected the status is up and is posible map iscsi volumes but with the simulator the funcionality is limted by it