Warning message while ONTAP 8.2.5P1 update

marciocosta — Wed, 04 Jun 2025 13:11:21 GMT

Hi!

After updating FAS2240-4 from 8.2.4P4 to 8.2.5P1, while checking the console messages I see it:

[: =: unexpected operator

Software update started on node xx. Updating image2 with package 825P1_q_image.tgz.
Listing package contents.
Decompressing package contents.
Invoking script (validation phase).
INSTALL running in check only mode
Mode of operation is UPDATE
Current image is image1
Alternate image is image2

Package MD5 checksums pass
Versions are compatible
Available space on boot device is 1551 MB
Required space on boot device is 497 MB
Kernel binary matches install machine type
[: =: unexpected operator
Invoking script (install phase). This may take up to 60 minutes.
Mode of operation is UPDATE
Current image is image1
Alternate image is image2

Package MD5 checksums pass
Versions are compatible
Available space on boot device is 1551 MB
Required space on boot device is 497 MB
Kernel binary matches install machine type
Getting ready to install image
Syncing device...
[: =: unexpected operator
Extracting to /cfcard/x86_64/freebsd/image2...
x BUILD
x CHECKSUM
x COMPAT.TXT
x INSTALL
x VERSION
x cap.xml
x fw.tgz
x kernel
x metadata.xml
x platform.ko
x platfs2g.img
x rootfs.img
Installed MD5 checksums pass
Installing diagnostic and firmware files
Firmware MD5 checksums pass
Installation complete. image2 updated on node xx.
After a clean shutdown, image2 will be set as the default boot image on node xx.
software: installation of 825P1_q_image.tgz completed.

Apparently everything is working correctly after update, but I am posting here if someone else has this situation and can share something else.

Thank you.

Re: Warning message while ONTAP 8.2.5P1 update

AlexDawson — Sat, 27 Oct 2018 14:41:29 GMT

Apparently this is a known issue with 8.2.5P1 - safe to ignore.

topic Re: Warning message while ONTAP 8.2.5P1 update in ONTAP Hardware

Warning message while ONTAP 8.2.5P1 update

Re: Warning message while ONTAP 8.2.5P1 update