https://community.netapp.com/t5/ONTAP-Hardware/FC-port-did-not-complete-initialization/m-p/146832#M9333 <P>It would be helpful to know what ONTAP version/mode, FAS model, and HBA/port we're referring to, here.</P> Wed, 27 Feb 2019 16:32:30 GMT andris 2019-02-27T16:32:30Z https://community.netapp.com/t5/ONTAP-Hardware/FC-port-did-not-complete-initialization/m-p/146806#M9332 <P>Hello,</P> <P>&nbsp;</P> <P>one of the FC ports (which is CNA) on our FAS that is not used (no cable/no link) has probably not finished initialization. Its status in sysconfig -a says "INITIALIZING FIRMWARE".&nbsp; Can it be the reason for some alerts in the EMS logs saying that this port was disabled because of the errors recived on this port?</P> <P>&nbsp;</P> <P>Can we reset this port to resolve this issue?</P> <P>&nbsp;</P> <P>Thanks!</P> Wed, 04 Jun 2025 12:48:05 GMT https://community.netapp.com/t5/ONTAP-Hardware/FC-port-did-not-complete-initialization/m-p/146806#M9332 RAB 2025-06-04T12:48:05Z https://community.netapp.com/t5/ONTAP-Hardware/FC-port-did-not-complete-initialization/m-p/146832#M9333 <P>It would be helpful to know what ONTAP version/mode, FAS model, and HBA/port we're referring to, here.</P> Wed, 27 Feb 2019 16:32:30 GMT https://community.netapp.com/t5/ONTAP-Hardware/FC-port-did-not-complete-initialization/m-p/146832#M9333 andris 2019-02-27T16:32:30Z