topic mounting a volume - permission denied in ONTAP Hardware

mounting a volume - permission denied

Afridi — Wed, 04 Jun 2025 11:22:52 GMT

Hi everyone

i have issue with mounting of a volume names as bkp01 and error received at database server is "permission denied"

i have Netapp 8.1 7 mode and i have created a volume as follows

vol create bkp01 aggr01 9975g
qtree create /vol/bkp01/qtree_01
snap reserve bkp01 0
snap sched bkp01 0
vol options bkp01 nvfail on
vol options bkp01 minra on

the entry at etc/exports is

/vol/bkp01/qtree_01   -sec=sys,rw=x.x.x.x,nosuid

and in etc/messages i recive fol

Client 10.10.10.10 (xid 123456789) is trying to access an unexported mount (fileid 123 on volume 0x12345678 [No volume name available])

client 10.10.10.10 (xid 123456789) in mount gets a bad FH trying to access /vol/bkp01/qtree_01

Re: mounting a volume - permission denied

aborzenkov — Mon, 13 Jan 2020 05:50:46 GMT

Did you actually export it? Editing /etc/export does not magically do it. Run "exportfs -a" to apply changes.

Re: mounting a volume - permission denied

paul_stejskal — Mon, 13 Jan 2020 15:02:33 GMT

Also, side note, but why is minra on? That disables readahead and hurts performance.

Re: mounting a volume - permission denied

Afridi — Thu, 16 Jan 2020 04:26:16 GMT

hi there

i am using this voloume for mirroring as destination

Re: mounting a volume - permission denied

paul_stejskal — Thu, 16 Jan 2020 15:48:30 GMT

I'd turn it off. Even if it's a DR system, you will suffer a read performance penalty.