create an aggregate with ADP

AhmedAl-Batoosh — Sun, 05 Jan 2025 10:51:25 GMT

How to create an aggregate with ADP, since all the commands have to specify the number of disks, even in config builder

Re: create an aggregate with ADP

TMACMD — Sun, 05 Jan 2025 18:13:36 GMT

Aff or fas? Adpv1 or apdv2?

With fas / adpv1 it’s straight forward.
with aff / adpv2 just think of each partition as a disk

if you are using aff, all SSDs should get partitioned by default in 9.14+. If not review this article

the disk must be owned and partitioned to be used correctly.

verify with

storage aggregate show-spare-disks

command

you should see the same disk on two nodes. One partition belongs to each node