Can't remove port from Default Broadcast Domain using Powershell

AllenChang — Mon, 19 Aug 2024 07:37:47 GMT

When I use powershell to remove port from Default Broadcast Domain,

it show me an error message

But I can do the same thing in ontap cli

Is any thing I miss in powershell environment?

Thanks

Re: Can't remove port from Default Broadcast Domain using Powershell

saharsh — Tue, 03 Sep 2024 10:35:08 GMT

Could you please share the debug logs? This will help me to identify the root cause of the error. You can enable logs using set-natoolkitconfiguration debug.

Re: Can't remove port from Default Broadcast Domain using Powershell

Ashun — Mon, 02 Dec 2024 06:50:04 GMT

In the broadcast domain Default using the Set - NcNetPortBroadcastDomain remove port seems to be not possible
However, you can separate the port into a separate broadcast domain, and then use Set-NcNetPortBroadcastDomain to remove the port and delete the separate broadcast domain

For example

PS C:\Windows\system32> Set-NcNetPortBroadcastDomain -Name Default -RemovePort cluster1-01:e0d
Set-NcNetPortBroadcastDomain : Port cannot be removed from Default Broadcast Domain

PS C:\Windows\system32> Split-NcNetPortBroadcastDomain -Name Default -Ipspace Default -NewName data01 -Port cluster1-01:e0d

BroadcastDomain Ipspace FailoverGroups Mtu PortUpdateStatusCombined
--------------- ------- -------------- --- ------------------------
data01 Default {data01} 1500 complete

PS C:\Windows\system32> Set-NcNetPortBroadcastDomain -Name data01 -RemovePort cluster1-01:e0d

BroadcastDomain Ipspace FailoverGroups Mtu PortUpdateStatusCombined
--------------- ------- -------------- --- ------------------------
data01 Default 1500 complete

PS C:\Windows\system32> Remove-NcNetPortBroadcastDomain -Name data01
PS C:\Windows\system32>

topic Can't remove port from Default Broadcast Domain using Powershell in Microsoft Virtualization Discussions

Can't remove port from Default Broadcast Domain using Powershell

Re: Can't remove port from Default Broadcast Domain using Powershell

Re: Can't remove port from Default Broadcast Domain using Powershell