topic cannot create CIFS vserver in Network and Storage Protocols

cannot create CIFS vserver

RPHELANIN — Mon, 19 May 2014 10:14:31 GMT

hi All

i am trying to create a cifs vserver on a simulator (8.1.2) but getting an error on the time difference

Error: Machine account creation procedure failed

[ 3] Loaded the preliminary configuration.

[ 42] Created a machine account in the domain

[ 42] Connecting to LSA server dc1.test.local (10.1.1.1)

**[ 264] FAILURE: Cluster and Domain Controller times differ by

** more than the configured clock skew

[ 264] Unable to connect to dc1.test.local through the

10.1.1.113 interface

[ 265] No servers available for MS_LSA, vserver: 2, domain:

test.local.

[ 265] Could not find Windows SID

'S-1-5-21-829917675-1945359377-2743707139-512'

Error: command failed: Failed to create the Active Directory machine account "BACKUP". Reason: SecD Error: no server available.

both the controller and DC are the same time so not sure ehy i am gettting this error.

any suggestions?

Re: cannot create CIFS vserver

scottgelb — Wed, 21 May 2014 16:44:07 GMT

Is the time zone different? Maybe it shows the same time but in a different time zone, so the actual time is different.

Re: cannot create CIFS vserver

RPHELANIN — Wed, 21 May 2014 17:20:42 GMT

Scot there all set to UTC

Sent from my iPhone

On 21 May 2014, at 17:45, Scott Gelb <xdl-communities@communities.netapp.com>

Re: cannot create CIFS vserver

scottgelb — Wed, 21 May 2014 21:03:44 GMT

How many network interfaces on the SVM and is routing setup?

net int show -vserver vsname

net routing-group route show -vserver vsname

Re: cannot create CIFS vserver

RPHELANIN — Thu, 22 May 2014 07:46:58 GMT

hi scott, all this is on my test lab and all is on a 10.1.1.x network. Below is thncme output:

cluster1::> net int show

(network interface show)

Logical Status Network Current Current Is

Vserver Interface Admin/Oper Address/Mask Node Port Home

----------- ---------- ---------- ------------------ ------------- ------- ----

cluster1

cluster_mgmt up/up 10.1.1.70/24 cluster1-01 e0b true

cluster1-01

cluster1-01_intercluster_lif1

up/up 10.1.1.2/24 cluster1-01 e0a true

mgmt1 up/up 10.1.1.71/24 cluster1-01 e0d true

prod

cifs down/down 10.1.1.103/24 cluster1-01 e0b true

data_lif1 up/up 10.1.1.102/24 cluster1-01 e0a true

prod_admin_lif1

up/up 10.1.1.101/24 cluster1-01 e0a true

6 entries were displayed.

cluster1::> net routing-groups show

(network routing-groups show)

Routing

Vserver Group Subnet Role Metric

--------- --------- --------------- ------------ -------

cluster1

c10.1.1.0/24

10.1.1.0/24 cluster-mgmt 20

cluster1-01

i10.1.1.0/24

10.1.1.0/24 intercluster 40

n10.1.1.0/24

10.1.1.0/24 node-mgmt 10

prod

d10.1.1.0/24

10.1.1.0/24 data 20

4 entries were displayed.

cluster1::>

Re: cannot create CIFS vserver

RPHELANIN — Thu, 22 May 2014 16:21:57 GMT

Scot, spun a new VM and promoted it to DC and then added my cifs vserver.

thanks for hte help

Re: cannot create CIFS vserver

sshajahan — Tue, 18 Jul 2017 03:27:23 GMT

Hi All,

Greetings,

I am facing same issue, kindly give me detail info to fix this issue.

Thanks!!

Regards;

Shajahan

@RPHELANIN wrote:
Scot, spun a new VM and promoted it to DC and then added my cifs vserver.
thanks for hte help