topic How can I assign a specific lun to a filer? with disk assign command in Network and Storage Protocols https://community.netapp.com/t5/Network-and-Storage-Protocols/How-can-I-assign-a-specific-lun-to-a-filer-with-disk-assign-command/m-p/23164#M2057 <HTML><HEAD></HEAD><BODY><P>what is the syntax for assigning a specific lun to a filer to load an OS on without an array attached. I only have SAN luns and want to use a specific size?</P></BODY></HTML> Thu, 05 Jun 2025 06:21:26 GMT EJSEGUR50 2025-06-05T06:21:26Z How can I assign a specific lun to a filer? with disk assign command https://community.netapp.com/t5/Network-and-Storage-Protocols/How-can-I-assign-a-specific-lun-to-a-filer-with-disk-assign-command/m-p/23164#M2057 <HTML><HEAD></HEAD><BODY><P>what is the syntax for assigning a specific lun to a filer to load an OS on without an array attached. I only have SAN luns and want to use a specific size?</P></BODY></HTML> Thu, 05 Jun 2025 06:21:26 GMT https://community.netapp.com/t5/Network-and-Storage-Protocols/How-can-I-assign-a-specific-lun-to-a-filer-with-disk-assign-command/m-p/23164#M2057 EJSEGUR50 2025-06-05T06:21:26Z Re: How can I assign a specific lun to a filer? with disk assign command https://community.netapp.com/t5/Network-and-Storage-Protocols/How-can-I-assign-a-specific-lun-to-a-filer-with-disk-assign-command/m-p/23169#M2059 <HTML><HEAD></HEAD><BODY><P>Boot into maintenance mode and use “disk assign” command.</P></BODY></HTML> Mon, 06 Aug 2012 17:48:28 GMT https://community.netapp.com/t5/Network-and-Storage-Protocols/How-can-I-assign-a-specific-lun-to-a-filer-with-disk-assign-command/m-p/23169#M2059 aborzenkov 2012-08-06T17:48:28Z