topic Re: FAS2040 protocol distribution in Network and Storage Protocols

FAS2040 protocol distribution

ijdnetapp — Thu, 05 Jun 2025 06:37:10 GMT

Hi team, I would like to know how to set the VIF's to be used by a Protocol, for example I want CIFS go trough vif pub01 and NFS go over vif nfs01, I have my VIF's already created pub01 trunked to e0a and e0b and nfs01 trunked to e0c and eod but I do not know how to assign this, is this possible ??

thank you very much in advance

Re: FAS2040 protocol distribution

columbus_admin — Thu, 19 Jan 2012 17:43:02 GMT

You would need to look into these options, available from at least 7.3.2:

interface.blocked.cifs
interface.blocked.ftpd
interface.blocked.iscsi
interface.blocked.nfs
interface.blocked.snapmirror

http://now.netapp.com/NOW/knowledge/docs/ontap/rel732/html/ontap/nag/GUID-1A9DE51F-C01F-4F8A-AABC-35D87BFE878D.html

I have not used them, so I don't know the limitations...

- Scott

Re: FAS2040 protocol distribution

paulstringfellow — Fri, 20 Jan 2012 08:07:24 GMT

If you’re using System manager you can for example turn off ISCSI under the ISCSI protocol option on a given adapter… so rather than enabling the protocol on an interface, you disable it…

That or the CLI as suggested will do it…

Paul Stringfellow

DDI:0151 221 3519

Tel: 0151 220 5552

Email: pauls@gardnersystems.co.uk

www.gardnersystems.co.uk<http://www.gardnersystems.co.uk>

Twitter @techstringy