topic Re: NetAPP OID description in Network and Storage Protocols

NetAPP OID description

FRANK_KEOUGH — Thu, 05 Jun 2025 06:17:48 GMT

Is there a document available from NetAPP with a description of the available MIBs/OIDs?

for example there is this MIB 1.3.6.1.4.1.789.1.9.20.1.5 (SnapMirrorState) it returns a table of values, so far I have seen 1 & 2.

What are the returned values? I am unable to find a document that tells me that information. System Admin Guide, protocol guide.

For example Dell publishes their MIBs and descriptions

http://support.dell.com/support/edocs/software/svradmin/7.0/en/SNMP/PDF/SNMP.pdf

It seems that NetAPP want to use traps and I would like to avoid that if possible.

Thanks

Re: NetAPP OID description

mharding — Mon, 15 Oct 2012 15:11:44 GMT

The documentation is on the Support site, arranged by ONTAP version: http://support.netapp.com/NOW/download/tools/mib/

Re: NetAPP OID description

chute — Thu, 01 Nov 2012 22:05:00 GMT

If you look inside the /etc/mib/netapp.mib file, all of the descriptions are included. Then you can cross reference the OIDs listed in the /etc/mib/traps.dat file. These files are found on each controller and as mentioned above are OnTap specific.

::EXAMPLE::

v3ccFsinfos OBJECT-TYPE

SYNTAX Counter32

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The number of NFS Version 3 calls received

for the NFSPROC3_FSINFO (Get Static File

System Information) procedure, that did not

result in the filesystem blocking to read

from disk, since the last time the statistics

were cleared."

Link to the KB doc talking about cross referencing the two. https://kb.netapp.com/support/index?page=content&id=1010045