topic Re: Target port not logged in state ? in Network and Storage Protocols

Target port not logged in state ?

ANANDONTAP — Thu, 05 Jun 2025 05:43:56 GMT

we are using 4 target port and HA pair in SAN environment.

some of the Target port not logged in state. kindly look at below output

This below igroup two initiator logged in state but each having single target renaming ( 1d, 1a) not showing.

CHNVSNNASA001> igroup show -v CHNSCRMDB01

CHNSCRMDB01 (FCP):

OS Type: linux

Member: 21:00:00:1b:32:88:82:b7 (logged in on: 1c, vtic)

Member: 21:00:00:1b:32:88:3c:af (logged in on: 1b, vtic)

UUID: 5b888390-bb4e-11de-b32b-00a0980cfbaf

This below igroup two initiator logged in state but one having single target renaming 1c not showing.

CHNVSNNASA001> igroup show -v CHNSCRMDB02

CHNSCRMDB02 (FCP):

OS Type: linux

Member: 21:00:00:1b:32:88:85:bc (logged in on: 1a, vtic)

Member: 21:00:00:1b:32:88:38:be (logged in on: 1d, 1b, vtic)

UUID: de7239b0-bb4c-11de-b32b-00a0980cfbaf

we verified all target ports are online and zoning part also verified fine only.

can any one explain exact issue?

still host having path failure.

rwelshman — Fri, 07 Feb 2014 13:46:50 GMT

what fibre switch are using? how are the zones configured?

ANANDONTAP — Sun, 09 Feb 2014 23:21:00 GMT

brocade switch, 4 target and single initiator with zone and single cfg

MSTORAGE_1986 — Mon, 10 Feb 2014 14:45:14 GMT

Hello ,

Use lun unmap command to unmap the lun & remap it again through lum map /vol/volumename/qtree/lun. If does not work try to reboot the server.

Regards,

Manish

ANANDONTAP — Tue, 11 Feb 2014 00:24:58 GMT

Manish,

this could be production environment. so we cant able reboot and also not possible to unmap , remap LUN.

so kindly provide alternative way......