topic Re: Connectivity for FAS2240-2 in Network and Storage Protocols

Connectivity for FAS2240-2

support_3 — Thu, 05 Jun 2025 06:10:04 GMT

Hi,

Anyone help on the cable connectivity for FAS 2240-2 Dual controller For FC san

ACP port is there is that required for connectivity if yes how?

saranraj456 — Fri, 15 Feb 2013 11:28:43 GMT

ACP is not for connectivity,meant for automatic disk shelf management.

Saran

VernMurray — Fri, 15 Feb 2013 19:57:27 GMT

The FC ports, if they are installed, are configured as initiators by default. You will need to reconfigure them to target mode.

Use these commands:

filer1> fcadmin config -d 1a

filer1> fcadmin config -d 1b

filer1> fcadmin config -t target 1a

filer1> fcadmin config -t target 1b

filer1> fcadmin config -e 1a

filer1> fcadmin config -e 1b

filer2> fcadmin config -d 1a

filer2> fcadmin config -d 1b

filer2> fcadmin config -t target 1a

filer2> fcadmin config -t target 1b

filer2> fcadmin config -e 1a

filer2> fcadmin config -e 1b