topic Re: Enable Cifs under vfiler in Network and Storage Protocols https://community.netapp.com/t5/Network-and-Storage-Protocols/Enable-Cifs-under-vfiler/m-p/64944#M5902 <HTML><HEAD></HEAD><BODY><P>This is a guess due to not having the history involved, but it would appear that "cifs terminate" was run.</P><P></P><P>You should be able to run "cifs restart" to bring the shares back online.&nbsp; The only impact you could potentially see is if there is an AD object by the same name(e.g. the vfiler was recreated and joined to the domain on another frame.)</P><P></P><P>- Scott</P></BODY></HTML> Thu, 19 Sep 2013 16:44:06 GMT cscott 2013-09-19T16:44:06Z Enable Cifs under vfiler https://community.netapp.com/t5/Network-and-Storage-Protocols/Enable-Cifs-under-vfiler/m-p/64940#M5900 <HTML><HEAD></HEAD><BODY><P>Data Ontap 8.1.2</P><P></P><P>I know when setting up the Filer you run the CIFS setup.&nbsp; However within a vfiler I am not sure if I need to run setup again or restart cifs. Here is what I get.</P><P></P><P>I have setup a volume/qtree under a vfiler.</P><P></P><P>Using CLI, I open the vfiler context testvfiler</P><P>&gt;cifs shares</P><P>cifs not running</P><P>restart</P><P>set preferred dc</P><P>test dc</P><P>setup cifs</P><P></P><P>I do have cifs running on, I want to verify which command I should run to enable cifs and share out my qtrees.&nbsp; I want to verify it will not affect my other filers or vfilers.</P><P></P><P>thanks,</P></BODY></HTML> Thu, 05 Jun 2025 05:53:52 GMT https://community.netapp.com/t5/Network-and-Storage-Protocols/Enable-Cifs-under-vfiler/m-p/64940#M5900 tbohuslovlm 2025-06-05T05:53:52Z Re: Enable Cifs under vfiler https://community.netapp.com/t5/Network-and-Storage-Protocols/Enable-Cifs-under-vfiler/m-p/64944#M5902 <HTML><HEAD></HEAD><BODY><P>This is a guess due to not having the history involved, but it would appear that "cifs terminate" was run.</P><P></P><P>You should be able to run "cifs restart" to bring the shares back online.&nbsp; The only impact you could potentially see is if there is an AD object by the same name(e.g. the vfiler was recreated and joined to the domain on another frame.)</P><P></P><P>- Scott</P></BODY></HTML> Thu, 19 Sep 2013 16:44:06 GMT https://community.netapp.com/t5/Network-and-Storage-Protocols/Enable-Cifs-under-vfiler/m-p/64944#M5902 cscott 2013-09-19T16:44:06Z