topic Re: Starting with netapp need help iscsi problem in Network and Storage Protocols

Starting with netapp need help iscsi problem

SCHATTENZEIT — Thu, 05 Jun 2025 05:42:51 GMT

Hello from Berlin !

I am new here, and I have a problem installing iscsi with netapp. Maybe, general Problem
My system: two nodes with oracle Linux 6.5

When I run discovery, it seems to be ok:

# iscsiadm -m discovery -t st -p 10.40.30.246:3260 –login
10.40.30.246:3260,2001 iqn.1992-08.com.netapp:sn.2014386705

But result of:

#iscsiadm -m node -T iqn.1992-08.com.netapp:sn.201438670 -p 10.40.30.246 –l
iscsiadm: No records found

in the /var/log/messages I find when I restart service:

#service iscsi restart

Message:

Feb 17 12:21:26 dbb-n15-01 iscsid: Connection2:0 to [target: iqn.1992-08.com.netapp:sn.2014386705, portal: 10.40.30.246,3260] through [iface: default] is shutdown.

Feb 17 12:21:26 dbb-n15-01 kernel: scsi5 : iSCSI Initiator over TCP/IP

Feb 17 12:21:27 dbb-n15-01 iscsid: Could not set session3 priority. READ/WRITE throughout and latency could be affected.

Feb 17 12:21:27 dbb-n15-01 iscsid: Connection3:0 to [target: iqn.1992-08.com.netapp:sn.2014386705, portal: 10.40.30.246,3260] through [iface: default] is operational now

Maybe a newbie problem, but I hope you can help me

Thanks a lot

Micha

Re: Starting with netapp need help iscsi problem

rwelshman — Mon, 17 Feb 2014 13:40:07 GMT

What is the configuration on the filer look like in terms of assigning LUNs to those servers via iSCSI?

Re: Starting with netapp need help iscsi problem

SCHATTENZEIT — Mon, 17 Feb 2014 14:42:12 GMT

Hello Riley,

thanks for your Answer The LUNS are in a inititator group RAC_N15, cause I want to use them as

raw devices. Maybe there is a little bit more I have to do ? We use Oracle 11g, but for a new project Oracle 12c (with asm)

RAC.

Greetings from Berlin

Michael

Re: Starting with netapp need help iscsi problem

SCHATTENZEIT — Tue, 18 Feb 2014 14:30:07 GMT

Hi,

the problem is fixed:

we had to add the InitiatorName to the igroup