topic Re: FAS2040 connected directly to server via FC in Network and Storage Protocols

FAS2040 connected directly to server via FC

SAMASHENN — Wed, 21 Aug 2013 11:59:20 GMT

Hi All.

I’m new to NetApp and have a small problem ,

We moved our NetApp device to a new location and IPS changed

that’s not the issue , the issue I face is that we I have connected the storage unit directly to a physical tin via fibre

LUN is created :

ZAPLTNA01> lun show -v

/vol/ZAVDCDPM01_vol/ZAVDCDPM01 10.0t (10995258193920) (r/w, online, mapped)

Serial#: 20pa3?DGVO5f

Share: none

Space Reservation: enabled

Multiprotocol Type: windows

Maps: ZAVDCDMP01=0

Occupied Size: 0 (0)

Creation Time: Wed Aug 21 10:13:44 SAST 2013

Cluster Shared Volume Information: 0x0

ZAPLTNA01> igroup show

ZAVDCDMP01 (FCP) (ostype: windows):

50:0a:09:81:98:3d:73:3b (not logged in)

50:0a:09:82:98:3d:73:3b (not logged in)

50:0a:09:80:88:3d:73:3b (not logged in)

and this is my

ZAPLTNA01> fcp config

0a: ONLINE <ADAPTER UP> Loop No Fabric

host address 0000ef

portname 50:0a:09:81:98:3d:73:3b nodename 50:0a:09:80:88:3d:73:3b

mediatype auto speed auto

0b: LINK NOT CONNECTED <ADAPTER UP>

host address 000000

portname 50:0a:09:82:98:3d:73:3b nodename 50:0a:09:80:88:3d:73:3b

mediatype auto speed auto

I’m not sure where what I have done wrong

can someone please put me on the right track .... please

thanks

Re: FAS2040 connected directly to server via FC

nigelg1965 — Wed, 21 Aug 2013 13:06:09 GMT

Was the host connected directly before or via fabric switch?

What mode are the ports in target or initiator (fcadmin config)?

Are you using snapdrive?

Is the filer bound to AD correctly (snapdrive using AD for authentication)

Re: FAS2040 connected directly to server via FC

SAMASHENN — Wed, 21 Aug 2013 13:12:22 GMT

hi ,

host was connected via fabric switch before

no snapdrive

the ports are on target mode

Local

Adapter Type State Status

---------------------------------------------------

0a target CONFIGURED online

0b target CONFIGURED online

thanks

Re: FAS2040 connected directly to server via FC

Cameron1337 — Fri, 16 Oct 2015 20:22:14 GMT

Hello, I'm running into this same issue. Did you ever figure out a resolution?