Network Lock Manager not registered with portmapper error in messages log

rwelshman — Fri, 22 May 2015 18:21:23 GMT

I am getting the following message in the messages file on one filer every hour:

"Network lock manager version 4 (for UDP) not registered with portmapper daemon on the client <client ip>"

There doesn't seem to be any issue with the client using the volumes it has mounted, so this doesn't seem to be a serious issue, however, I would like to stop it spamming the messages file.

I've tried restarting the lock manager service on the client as well as port mapper (rpcbind) and even gave it a reboot. But the error message is still being generated.

NFSv4 is enabled on the filer, but the client is mounting using NFSv3.

It looks like the process has registered ok from the cilent side:

rpcinfo -p
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 25086 status
100024 1 tcp 35999 status
100021 1 udp 51494 nlockmgr
100021 3 udp 51494 nlockmgr
100021 4 udp 51494 nlockmgr
100021 1 tcp 52961 nlockmgr
100021 3 tcp 52961 nlockmgr
100021 4 tcp 52961 nlockmgr

Anyone seen this before? Any suggestions? Thanks!

I am getting the following messages in the messages file on one filer every hour:

Network lock manager version 4 (for UDP) not registered with portmapper daemon on the client <client ip>

There doesn't seem to be any issues with the client using the volume it has mounted, so this doesn't seem to be a serious issue, however, I would like to stop it spamming the messgaes file.

I've tried restarting the lock manager service on the client as well as port mapper (rpcbind) and even gave it a reboot. But the error message is still being generated.

NFSv4 is enabled on the filer, but the client is mounting using NFSv3.

Re: Network Lock Manager not registered with portmapper error in messages log

Sharon — Fri, 11 Mar 2016 13:51:39 GMT

How to check the same from Filer end. Pls. help.

Is there any command to check?

NetApp Release 8.1.3P3 7-Mode is the version.

Sharon

topic Re: Network Lock Manager not registered with portmapper error in messages log in Network and Storage Protocols

Network Lock Manager not registered with portmapper error in messages log

Re: Network Lock Manager not registered with portmapper error in messages log