topic Re: Has anyone ever seen this message in the EMS logs - Nblade_BytesThrshldExceed ??? in Network and Storage Protocols

Has anyone ever seen this message in the EMS logs - Nblade_BytesThrshldExceed ???

xiambi — Wed, 04 Jun 2025 15:10:50 GMT

Re: Has anyone ever seen this message in the EMS logs - Nblade_BytesThrshldExceed ???

ekashpureff — Thu, 20 Apr 2017 18:53:26 GMT

Xiambe -

From the Syslog Translator tool on the support site:

Description	This message occurs when the number of bytes waiting in a connection''s queue exceeds its threshold. This condition could lead to memory buffer exhaustion if a connection''s queue is not being serviced quickly enough.
Corrective Action	If this condition persists, contact NetApp technical support.

Syslog translator can be found at:

http://mysupport.netapp.com/eservice/ems

I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, Fast Lane US http://www.fastlaneus.com/
(P.S. I appreciate 'kudos' on any helpful posts.)

Re: Has anyone ever seen this message in the EMS logs - Nblade_BytesThrshldExceed ???

xiambi — Mon, 24 Apr 2017 12:52:39 GMT

I totally forgot about the translator.

Thanks for the insight!

Re: Has anyone ever seen this message in the EMS logs - Nblade_BytesThrshldExceed ???

joker_morgan — Thu, 27 Jul 2017 17:25:36 GMT

you probably have seen this by now but figure I would pass along just in case. The NBlade message you are referring appears to be a burt.

http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=1043958