topic Re: Ops Mgr - nfs_latency? in Active IQ Unified Manager Discussions

Ops Mgr - nfs_latency?

otter — Thu, 05 Jun 2025 07:30:58 GMT

Team,

I have had a customer ask the following question:

Could you find out a good description of what nfs_latency is in Ops Mgr?

I had this from a previous request yet not sure it is the same:

You can expect PA to grab roughly 5% maybe more if you turn on a lot of additional counters. If you don’t need to look at all of the filers for this issue you can use the command: dfm host set <filername> perfAdvisorTransport=disabled to not collect data on one or more. (The performance data and charts we have show ~2% overhead with a few peaks up to 4.5% CPU utilization)

If you want to exclude a lot of Filers put them in a group and use dfm host set <groupname> perfAdvisorTransport

Can you let me know a “good description of what nfs_latency is in Ops Mgr?”

I look forward to your response.

Respectfully,

Jim Otstott

(425) 750-2951

Re: Ops Mgr - nfs_latency?

nagesha — Wed, 11 Feb 2009 03:04:42 GMT

Hi Jim,

This is regarding nfs_latency, it would be the average latency of all the ops. So it would be average of nfs read, write and other latencies.

Regards,
Nagesh.

Re: Ops Mgr - nfs_latency?

otter — Wed, 11 Feb 2009 22:56:08 GMT

Here is a screen shot of the filer:

The nfs_latency show huge spikes and the customer does not know why. This doesn’t look like an average of the other nfs categories…

The latency looks bad and not sure why or what to look at…

Any advice?

Re: Ops Mgr - nfs_latency?

nagesha — Thu, 12 Feb 2009 04:33:55 GMT

Jim,

This is a bug in DFM3.7.1, please refer to Burt 327609 for more details, It is fixed in oldmonk release i.e. DFM3.8.
Please let me know if you need any further assistance.

Regards,

Nagesh.

Re: Ops Mgr - nfs_latency?

otter — Thu, 12 Feb 2009 18:31:52 GMT

Nagesh,

I looked up the BURT and see that it states that this is fixed yet I don't see that 3.8 is released? Has the new version been released? My customer has an N-Series and can't find DFM 3.8 on the IBM web site...

Can you let me know if the new release is available and where I can point my customer to?

Thanks,

Jim

Re: Ops Mgr - nfs_latency?

vidula — Thu, 12 Feb 2009 21:40:37 GMT

Hi Jim,

As you have found out, DFM 3.8 server version has not been released by NetApp yet. Typically IBM delivers the software for N series in reasonable currency (within 2-4 weeks of when we make it available to them), so correspondingly, DFM v 3.8 is not available for N series either. That said, I would encourage you to point the N series customer to have that conversation with the IBM support team if this is causing business issues as they would be the right folks to assess the total problem and appropriate resolution.

Vidula

Re: Ops Mgr - nfs_latency?

otter — Thu, 12 Feb 2009 23:59:04 GMT

Great information!!! One more question...do you know when DFM 3.8 will be released by NetApp?

Re: Ops Mgr - nfs_latency?

vidula — Fri, 13 Feb 2009 01:31:52 GMT

At the moment, it looks like April/May 09