topic PCI card swap question in Active IQ Unified Manager Discussions https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/PCI-card-swap-question/m-p/59252#M12333 <HTML><HEAD></HEAD><BODY><P>Can you swap out a PCI card on an unconfigured fas2240 while the machine is powered off? If so, will the initial setup run the same way? If not, is there a special procedure on how to change the type of card?</P></BODY></HTML> Thu, 05 Jun 2025 06:02:27 GMT DANIEL_HPM 2025-06-05T06:02:27Z PCI card swap question https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/PCI-card-swap-question/m-p/59252#M12333 <HTML><HEAD></HEAD><BODY><P>Can you swap out a PCI card on an unconfigured fas2240 while the machine is powered off? If so, will the initial setup run the same way? If not, is there a special procedure on how to change the type of card?</P></BODY></HTML> Thu, 05 Jun 2025 06:02:27 GMT https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/PCI-card-swap-question/m-p/59252#M12333 DANIEL_HPM 2025-06-05T06:02:27Z Re: PCI card swap question https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/PCI-card-swap-question/m-p/59257#M12335 <HTML><HEAD></HEAD><BODY><P>You'll want to contact your sales rep or support specialist for specific instructions, but yes the 10GbE or FCP mezzanine card should be installed while the system is powered off.&nbsp; System Setup will detect and configure the 10GbE ports for you, but it does not currently handle FCP ports.&nbsp; The setup should still work fine, but you will need to configure FCP later in the CLI or System Manager.</P><P></P><P>Cheers!</P></BODY></HTML> Fri, 17 May 2013 14:21:49 GMT https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/PCI-card-swap-question/m-p/59257#M12335 timothyn 2013-05-17T14:21:49Z