topic Re: DFM and SNMP in Active IQ Unified Manager Discussions

DFM and SNMP

dhebert — Thu, 05 Jun 2025 06:59:33 GMT

Hi all,

I am trying to understand some more details about how SNMP and DFM work. Here are my questions:

1. I know the filer sends SNMP traps, and you can specify multiple trap servers to receive them. Should the DFM Server be a trap server for the filers it is managing?

2. I see that DFM has its own MIBs file. Are those MIBs unique from the ONTAP MIBs?

3. Finally, in a large data center environment managed by a tool like HPOM or Tivoli, what does DFM do with SNMP traps? Does it pass through SNMP traps from the filers? Does it send only its own SNMP traps? Does it send SNMP traps at all?

I've attached a simple drawing to help illustrate my confusion.

Re: DFM and SNMP

tanmoy — Wed, 23 Feb 2011 18:10:13 GMT

Hello Daniel,

I have answers for two of your queries.

1. I know the filer sends SNMP traps, and you can specify multiple trap servers to receive them. Should the DFM Server be a trap server for the filers it is managing?

Tanmoy : Yes you need to set the DFM server as your trap server. You have to set it in filer.

Tanmoy : DFM receives traps from filers and process those and present those to DFM users as events. For example, autosize and autodelete; if these are triggered in filer; ONTAP will send traps to trap server which should be DFM in your case. DFM will show those autosize and autodelete as events.

I will leave the MIB question for the other experts to respond to.

Thanks

Tanmoy

Re: DFM and SNMP

rle — Wed, 23 Feb 2011 18:21:02 GMT

1. I know the filer sends SNMP traps, and you can specify multiple trap servers to receive them. Should the DFM Server be a trap server for the filers it is managing?

Yes the DFM server should be a trap service for the filers.

2. I see that DFM has its own MIBs file. Are those MIBs unique from the ONTAP MIBs?

DFM MIBs are unique from ONTAP MIBs.

As Tamoy stated DFM has events which can be alarmed. Once an event is alarmed an e-mail can be sent, a script can be run, or an SNMP trap can be sent to another trap server.

Regards,

- Rick -

Re: DFM and SNMP

hiyer — Thu, 24 Feb 2011 17:55:23 GMT

It's not required that DFM be a trap receiver for the filer. DFM monitoring will mostly work without it. There are a few extra features available if it is configured as a trap server. Of the top of my head I can recall:

alerts if the 'maxdirsize' for a file system is about to be exceeded
automatic triggering of monitors when certain traps are received (e.g. broken disk)

Re: DFM and SNMP

lovik_netapp — Fri, 25 Feb 2011 12:45:06 GMT

If DFM doesn't receives trap then it will take it's own good time and will not discover the issue unless the next monitoring interval, whereas if you configure the filer to send traps it will start the scan of that subsystem of filer immediately and will send it's own trap as per the alarm configuration.

Re: DFM and SNMP

demond_nc — Wed, 26 Oct 2011 16:23:31 GMT

Rick, have you actually gotten this to work? I am trying to get DFM to send SNMP traps to HP Network Node Manager. Unfortunately I am not having much success:) I have added a traphost as a recipient in a DFM alarm, however Network Node Manager is not receiving the traps. The format I used for adding the traphost is community_string@traphost_IP. Is this correct?