topic Operations Manager not showing physical space/drives in Active IQ Unified Manager Discussions

Operations Manager not showing physical space/drives

TOMFUIE01 — Thu, 05 Jun 2025 06:07:46 GMT

When reviewing Operations Manager, I have a system not reporting physical disk space. Well, it reports the spare disks only.

dfm report view disks filer only reports the spares also.

What can I look at to determine why the physical isn't showing up in dfm?

Thanks,

Tom

Re: Operations Manager not showing physical space/drives

adaikkap — Thu, 14 Mar 2013 01:52:08 GMT

Hi Tom,

What do you mean by physical disk? Are you looking for unassigned disk? If so dfm doesn't report on them.

You can also look at disks-all report.

Regards

Adai

Re: Operations Manager not showing physical space/drives

TOMFUIE01 — Thu, 14 Mar 2013 12:10:32 GMT

Hi Adai,

I'm referring to the Physical Space portion of the Operations Manager, Member Details, Physical Systems. There should be Data Disks, Parity Disks, and Spare Disks...all I'm getting is Spare Disks for a particular system. Storage Capacity section appears to be correct.

From Operations Manager, Reports, All, Disks, Available Reports/All Disks, Resource of this particular system...only displays the spare disks.

I'm approaching this from a reporting aspect, having to learn administration for good reporting. I'm not familiar with assigning. I assume the disks are assigned since there are aggregates, etc.

Pointers welcome. Thank you for responding.

Re: Operations Manager not showing physical space/drives

TOMFUIE01 — Fri, 15 Mar 2013 13:44:56 GMT

From the command line, sysconfig -r gives correct information. How is dfm/Operations Manager getting the information?

I do get correct information with other systems...something about this one is different and has me stumped.

Thanks,

Tom

Re: Operations Manager not showing physical space/drives

adaikkap — Sun, 17 Mar 2013 06:45:59 GMT

Hi Tom,

I need some more details,

Whats version and mode of OCUM
What Version is of ONTAP is the controller running ?
Can you give an example of screenshot for a controller that's working and one which isn't ?
What kind of disk are those ? The ones which arent being reported ? Like type of disk, size etc ?
what is the dfm host diag for the controller returning ?

Regards

adai

Re: Operations Manager not showing physical space/drives

TOMFUIE01 — Wed, 20 Mar 2013 19:43:45 GMT

Let's see what I can do:

1) 5.1 7-mode

2) 8.1.2 -- the only controller running that version...I wonder if this is the issue??

3) no...a lot of editing.

4) 827.7GB SATA

5) Below is part of the result. I've removed hostname/ipaddress/etc. This is a readonly setup. The rsh/ssh is the same from the other working controllers.

Network Connectivity

IP Address ipaddress

Network (discovery disabled)

DNS Aliases hostname

DNS Addresses ipaddress

SNMP Version in Use SNMPv1

SNMPv1 Passed (79 ms)

SNMP Community something

SNMP sysName hostname

SNMP sysObjectID .1.3.6.1.4.1.789.2.3 (Clustered Filer)

SNMP productId 1873813305

SNMPv3 Passed (1 ms)

SNMPv3 Auth Protocol MD5

SNMPv3 Privacy Enabled No

SNMPv3 Username username

SNMP sysName hostname

SNMP sysObjectID .1.3.6.1.4.1.789.2.3 (Clustered Filer)

SNMP productId 1873813305

ICMP Echo Passed (1 ms)

HTTP Passed (0 ms)

NDMP (login not set) Skipped

RSH Permission denied, user does not have access to version

SSH Permission denied, user does not have access to version

RLM Skipped (hostRLMAddress is empty)

XML (http port 80) Passed (2 ms)

Host Details

According to: DataFabric Manager server Host

Host Name hostname hostname

System ID id id

Model FAS6280 FAS6280

Type Clustered Storage System Clustered Storage System

OS Version 8.1.2 7-Mode 8.1.2 7-Mode

Revisions 380,8.1.1,2.2.1 380,8.1.1,2.2.1

Monitoring timestamps

All Performance Advisor -- Passed.